Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Previous issue > Previous issue



Table of Contents | December, 2020  Vol. 21 No. 6 Previous Issue | Next Issue | Archive
Articles
 Body and Safety
1339 IMPACT ATTENUATOR OPTIMUM DESIGN FOR A FSAE RACING CAR BY NUMERICAL AND EXPERIMENTAL CRASH ANALYSIS
Ludovica Coppola, Bruno De Marco, Vincenzo Niola, Aleksandr Sakhnevych, Francesco Timpone
Int J Automot Technol. 2020;21(6):1339-1348.    DOI: https://doi.org/10.1007/s12239-020-0126-4
         Cited By 1
 Electric, Fuel Cell, and Hybrid Vehicle
1349 EXPOSURE ASSESSMENT OF A 20-kW WIRELESS POWER TRANSFER SYSTEM FOR ELECTRIC VEHICLES
Beomjin Choi, Eunha Kim, Waegyeong Shin, Sangwook Park, Kichai Kim
Int J Automot Technol. 2020;21(6):1349-1353.    DOI: https://doi.org/10.1007/s12239-020-0127-3
      
 Human Factors and Ergonomics, Other Fields of Automotive Engineering
1355 DRIVERS’ USER-INTERFACE INFORMATION PRIORITIZATION IN MANUAL AND AUTONOMOUS VEHICLES
Jung Min Lee, Su Wan Park, Da Young Ju
Int J Automot Technol. 2020;21(6):1355-1367.    DOI: https://doi.org/10.1007/s12239-020-0128-2
         Cited By 1
 Engine and Emissions, Fuels and Lubricants
1369 NUMERICAL AND EXPERIMENTAL STUDY ON KNOCK SOURCES IN SPARK IGNITION ENGINE WITH ELECTROMAGNETIC VALVE TRAIN
Jiangtao Xu, Yong Feng, Siqin Chang, Tongjun Guo
Int J Automot Technol. 2020;21(6):1369-1378.    DOI: https://doi.org/10.1007/s12239-020-0129-1
         Cited By 1
 Noise, Vibration and Harshness
1379 EVALUATION INDEX FOR SPORTY ENGINE SOUND REFLECTING EVALUATORS’ TASTES, DEVELOPED USING K-MEANS CLUSTER ANALYSIS
Jae Hyuk Park, Yeon June Kang
Int J Automot Technol. 2020;21(6):1379-1389.    DOI: https://doi.org/10.1007/s12239-020-0130-8
      
 Electric, Fuel Cell, and Hybrid Vehicle
1391 DESIGN OF TRACTION MOTOR FOR MITIGATING ENERGY CONSUMPTION OF LIGHT ELECTRIC VEHICLE CONSIDERING MATERIAL PROPERTIES AND DRIVE CYCLES
Dong-Min Kim, Young-Hoon Jung, Kyoung-Soo Cha, Myung-Seop Lim
Int J Automot Technol. 2020;21(6):1391-1399.    DOI: https://doi.org/10.1007/s12239-020-0131-7
      
 Engine and Emissions, Fuels and Lubricants
1401 CHARACTERISTICS OF EXHAUST EMISSIONS CONVERSION OF COMMERCIAL CU- AND FE-SCR CATALYTS
Choong-kil Seo, Kyung seok Lee
Int J Automot Technol. 2020;21(6):1401-1408.    DOI: https://doi.org/10.1007/s12239-020-0132-6
      
 Electric, Fuel Cell, and Hybrid Vehicle, Electrical and Electronics, Engine and Emissions
1409 ADAPTIVE DUAL CLOSED LOOP SPEED CONTROL WITH THROTTLE VALVE DYNAMICS FOR NATURAL GAS ENGINE IN RANGE-EXTENDED ELECTRIC VEHICLES
Wenyu Xiong, Jie Ye, Qichangyi Gong, Han Feng, Anwen Shen, Jinbang Xu
Int J Automot Technol. 2020;21(6):1409-1418.    DOI: https://doi.org/10.1007/s12239-020-0133-5
      
 Electric, Fuel Cell, and Hybrid Vehicle, Engine and Emissions, Heat Transfer, Fluid and Thermal Engineering
1419 PERFORMANCE PREDICTION AND FLOW CHARACTERISTICS OF A HYDRAULIC PUMP FOR ABS AND ESC SYSTEMS USING FSI SIMULATION
Jang-oh Mo, Young-ho Lee
Int J Automot Technol. 2020;21(6):1419-1429.    DOI: https://doi.org/10.1007/s12239-020-0134-4
         Cited By 1
 Body and Safety, Manufacturing, Materials and Recycling
1431 AN INTENTION-AWARE AND ONLINE DRIVING STYLE ESTIMATION BASED PERSONALIZED AUTONOMOUS DRIVING STRATEGY
Bohua Sun, Weiwen Deng, Jian Wu, Yaxin Li, Jinsong Wang
Int J Automot Technol. 2020;21(6):1431-1446.    DOI: https://doi.org/10.1007/s12239-020-0135-3
      
 Body and Safety, Chassis, Manufacturing, Materials and Recycling
1447 DRAG TORQUE PREDICTION OF AUTOMOTIVE WHEEL BEARING SEALS CONSIDERING MATERIAL AND GEOMETRICAL UNCERTAINTIES USING MONTE CARLO SIMULATION
Seung Pyo Lee, Jae Hoon Kim, Ki Weon Kang
Int J Automot Technol. 2020;21(6):1447-1453.    DOI: https://doi.org/10.1007/s12239-020-0136-2
      
 Body and Safety, Manufacturing, Materials and Recycling
1455 TOPOLOGY OPTIMIZATION AND ADDITIVE MANUFACTURING OF AUTOMOTIVE COMPONENT BY COUPLING KINETIC AND STRUCTURAL ANALYSES
Gyu-Won Kim, Yeong-Il Park, Keun Park
Int J Automot Technol. 2020;21(6):1455-1463.    DOI: https://doi.org/10.1007/s12239-020-0137-1
         Cited By 3
 Engine and Emissions, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering
1465 OXIDATION KINETICS OF SOOT ON ACICULAR MULLITE MEMBRANE FILTER USING ELECTRON MICROSCOPY AND THERMOGRAVIMETRIC ANALYSIS
Eakkawut Saenkhumvong, Preechar Karin, Chinda Charoenphonphanich, Naratip Vittayakorn, Katsunori Hanamura
Int J Automot Technol. 2020;21(6):1465-1473.    DOI: https://doi.org/10.1007/s12239-020-0138-0
      
 Engine and Emissions, Fuels and Lubricants
1475 RHEOLOGICAL AND WETTABILITY PROPERTIES OF ENGINE OIL WITH A SUBMICRON SPHERICAL CARBON PARTICLE LUBRICANT MIXTURE
Abdullah Awad Alazemi, Feras Ghazi Alzubi, Abdulsalam Alhazza, Arthur Dysart, Vilas Ganpat Pol
Int J Automot Technol. 2020;21(6):1475-1482.    DOI: https://doi.org/10.1007/s12239-020-0139-z
      
 Electrical and Electronics
1483 SCHEDULE OPTIMIZATION FOR TTETHERNET-BASED TIME-TRIGGERED AUTOMOTIVE SYSTEMS
Rui Zhao, Guihe Qin, Jie Yan, Jun Qin
Int J Automot Technol. 2020;21(6):1483-1494.    DOI: https://doi.org/10.1007/s12239-020-0140-6
      
 Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline
1495 MULTI-OBJECTIVE OPTIMIZATION OF POWERTRAIN COMPONENTS FOR ELECTRIC VEHICLES USING A TWO-STAGE ANALYSIS MODEL
Kihan Kwon, Minsik Seo, Seungjae Min
Int J Automot Technol. 2020;21(6):1495-1505.    DOI: https://doi.org/10.1007/s12239-020-0141-5
         Cited By 2
 Body and Safety, Noise, Vibration and Harshness
1507 ANALYSIS AND EVALUATION OF THE EURO-NCAP UPPER LEGFORM TO WAD 775 MM TEST
Sang-ok Park, Jinseop Park, Gyung-Jin Park
Int J Automot Technol. 2020;21(6):1507-1518.    DOI: https://doi.org/10.1007/s12239-020-0142-4
      
 Connected Automated Vehicles and ITS, Electric, Fuel Cell, and Hybrid Vehicle, Vehicle Dynamics and Control
1519 ANALYSIS OF CYLINDRICITY ERROR OF HIGH AND LOW TEMPERATURE STORAGE TESTED ALTERNATOR STATORS
Gyula Varga, Viktoria Ferencsik
Int J Automot Technol. 2020;21(6):1519-1526.    DOI: https://doi.org/10.1007/s12239-020-0143-3
      
 Electrical and Electronics, Transmission and Driveline, Other Fields of Automotive Engineering
1527 MULTI-LEVEL DATA ARRANGEMENT ALGORITHM FOR CAN DATA COMPRESSION
Yeon-Jin Kim, Yang Zou, Young-Eun Kim, Jin-Gyun Chung
Int J Automot Technol. 2020;21(6):1527-1537.    DOI: https://doi.org/10.1007/s12239-020-0144-2
      
 Materials and Recycling
1539 PREDICTION OF NONLINEAR STIFFNESS OF AUTOMOTIVE BUSHINGS BY ARTIFICIAL NEURAL NETWORK MODELS TRAINED BY DATA FROM FINITE ELEMENT ANALYSIS
Yeon-Woo Jung, Heung-Kyu Kim
Int J Automot Technol. 2020;21(6):1539-1551.    DOI: https://doi.org/10.1007/s12239-020-0145-1
         Cited By 1
 Human Factors and Ergonomics, Other Fields of Automotive Engineering
1553 ANALYSIS OF CO-RELATION BETWEEN OBJECTIVE MEASUREMENT AND SUBJECTIVE ASSESSMENT FOR DYNAMIC COMFORT OF VEHICLES
Di Ao, Pak Kin Wong, Wei Huang, Xing Tai Mei, Yu Cong Cao, Jing Zhao
Int J Automot Technol. 2020;21(6):1553-1567.    DOI: https://doi.org/10.1007/s12239-020-0146-0
         Cited By 1
 Engine and Emissions, Fuels and Lubricants
1569 EFFECTS OF RING PACK FRICTION HEAT ON TEMPERATURE FIELDS OF PISTON SET-LINER
Long Zhou, Guang Hua Sun, Ying Ying Guo, Min Li Bai
Int J Automot Technol. 2020;21(6):1569-1578.    DOI: https://doi.org/10.1007/s12239-020-0147-z
      
 Engine and Emissions, Fuels and Lubricants
1579 FRICTION AND WEAR PERFORMANCE OF DOUBLE-BUMP DESIGN OF PISTON SKIRT MAIN THRUST SIDE
Yin Bifeng, Zu Jiajun, Xu Bo, Huang Gongyin, Yang Manying
Int J Automot Technol. 2020;21(6):1579-1586.    DOI: https://doi.org/10.1007/s12239-020-0148-y
      
 Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline
1587 PREDICTION OF SEALING PERFORMANCE OF V-COUPLING OF TURBOCHARGER HOUSING USING ANALYTICAL AND FINITE ELEMENT ANALYSIS
Bok-Lok Choi, Seong-Ki Hong, Byoung-Ho Choi
Int J Automot Technol. 2020;21(6):1587-1595.    DOI: https://doi.org/10.1007/s12239-020-0149-x
      
  Engine and Emissions, Fuels and Lubricants
1597 REVIEW OF RECENT AFTER-TREATMENT TECHNOLOGIES FOR DE-NOx PROCESS IN DIESEL ENGINES
Byungchul Choi, Kyungseok Lee, Geonseog Son
Int J Automot Technol. 2020;21(6):1597-1618.    DOI: https://doi.org/10.1007/s12239-020-0150-4
         Cited By 3
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next