Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Previous issue > Previous issue



Table of Contents | October, 2020  Vol. 21 No. 5 Previous Issue | Next Issue | Archive
Articles
 Engine and Emissions, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering
1077 EXPERIMENTAL INVESTIGATION TO ANALYZE THE EFFECTS OF OIL DILUTION ON UNINTENDED ACCELERATION IN A DIESEL ENGINE
Youngho Jun
Int J Automot Technol. 2020;21(5):1077-1087.    DOI: https://doi.org/10.1007/s12239-020-0101-0
      
 Body and Safety, Manufacturing, Materials and Recycling
1089 STUDY ON SEATING COMFORT OF POLYURETHANE MULTILAYER SEAT CUSHIONS
Junho Moon, Tridib Kumar Sinha, Sung Bok Kwak, Jin Uk Ha, Jeong Seok Oh
Int J Automot Technol. 2020;21(5):1089-1095.    DOI: https://doi.org/10.1007/s12239-020-0102-z
         Cited By 1
 Manufacturing, Materials and Recycling, Transmission and Driveline
1097 PREFORM OPTIMIZATION OF FUNCTIONAL BEVEL GEAR FOR WARM FORGING PROCESSES
Risky Ayu Febriani, Hong Seok Park, Saurabh Kumar, Chang Myung Lee
Int J Automot Technol. 2020;21(5):1097-1106.    DOI: https://doi.org/10.1007/s12239-020-0103-y
         Cited By 1
 Body and Safety, Chassis, Manufacturing, Materials and Recycling
1107 PRACTICAL EVALUATION OF BALL STUD PLATING EFFECTS ON THE INCREASE OF FREE GAP OF BALL JOINTS IN THE VEHICLE
Soo Sik Chung, Young Ze Lee, Sang Oh Park
Int J Automot Technol. 2020;21(5):1107-1111.    DOI: https://doi.org/10.1007/s12239-020-0104-x
         Cited By 1
 Materials and Recycling
1113 FEM ANALYSIS AND EXPERIMENT VALIDATION ON MULTI-PASS FORGING OF TORX ROUND FLANGE BOLT WITH CONSTANT SHEAR FRICTION
Shih-Hsien Lin, Dyi-Cheng Chen, Un-Chin Chai, Gow-Yi Tzou
Int J Automot Technol. 2020;21(5):1113-1119.    DOI: https://doi.org/10.1007/s12239-020-0105-9
      
 Materials and Recycling
1121 ANALYSIS OF FORCE TRANSMISSION CHARACTERISTICS OF MODULAR DEFORMABLE TIRE
Kongshu Deng, Lu Zeng, Yicheng Ding, Zhurong Yin
Int J Automot Technol. 2020;21(5):1121-1127.    DOI: https://doi.org/10.1007/s12239-020-0106-8
         Cited By 2
 Body and Safety, Noise, Vibration and Harshness
1129 ANALYTICAL EVALUATION OF THE PASSENGER SAFETY OF THE KOREAN LIGHT TACTICAL VEHICLE IN ACCORDANCE WITH ECE R 66 AND ECE R 29
Kwonhee Suh, Hiseak Yoon
Int J Automot Technol. 2020;21(5):1129-1137.    DOI: https://doi.org/10.1007/s12239-020-0107-7
      
 Engine and Emissions, Fuels and Lubricants
1139 EFFECT OF THE METAL-FOAM GASOLINE PARTICULATE FILTER (GPF) ON THE VEHICLE PERFORMANCE IN A TURBOCHARGED GASOLINE DIRECT INJECTION VEHICLE OVER FTP-75
Sungha Baek, Jaeho Cho, Kangjin Kim, Seungho Ahn, Cha-Lee Myung, Simsoo Park
Int J Automot Technol. 2020;21(5):1139-1147.    DOI: https://doi.org/10.1007/s12239-020-0108-6
         Cited By 1
 Body and Safety, Manufacturing, Materials and Recycling
1149 INTELLIGENT DESIGN FOR AUTOMOTIVE INTERIOR TRIM STRUCTURES BASED ON KNOWLEDGE RULE-BASED REASONING
Xuebing Wei, Hang Yuan, Hui Wang, Yizhe Chen
Int J Automot Technol. 2020;21(5):1149-1167.    DOI: https://doi.org/10.1007/s12239-020-0109-5
      
 Body and Safety
1169 THREE-DIMENSIONAL NUMERICAL MODEL OF FREE MOTION HEADFORM USED IN IMPACT TESTS ON VEHICLE INTERIOR
Beom-Gyo Seo, Hyun-Yong Jeong
Int J Automot Technol. 2020;21(5):1169-1176.    DOI: https://doi.org/10.1007/s12239-020-0110-z
      
 Body and Safety, Connected Automated Vehicles and ITS, Other Fields of Automotive Engineering
1177 QUANTITATIVE ASIL ESTIMATION USING FUZZY SET THEORY
Sung min Kim, Gyeong-hun Do, Junkeon Ahn, Juneyoung Kim
Int J Automot Technol. 2020;21(5):1177-1184.    DOI: https://doi.org/10.1007/s12239-020-0111-y
      
 Engine and Emissions, Fuels and Lubricants
1185 EXPERIMENTAL RESEARCH ON EXHAUST THERMAL MANAGEMENT CONTROL STRATEGY FOR DIESEL PARTICULAR FILTER ACTIVE REGENERATION
Jian Wang, Bin Wang, Zheng Cao
Int J Automot Technol. 2020;21(5):1185-1194.    DOI: https://doi.org/10.1007/s12239-020-0112-x
      
 Engine and Emissions, Fuels and Lubricants
1195 ENGINE INDICATED TORQUE ESTIMATION OF A NATURALLY ASPIRED GASOLINE ENGINE
Jinrak Park, Seibum Choi, Jiwon Oh, Jeongsoo Eo
Int J Automot Technol. 2020;21(5):1195-1205.    DOI: https://doi.org/10.1007/s12239-020-0113-9
      
 Body and Safety, Manufacturing, Materials and Recycling
1207 ANALYTICAL SENSITIVITY ANALYSIS METHOD OF CROSSSECTIONAL SHAPE FOR THIN-WALLED AUTOMOBILE FRAME CONSIDERING GLOBAL PERFORMANCES
Yanhua Ma, Xinchen Wang, Wenjie Zuo
Int J Automot Technol. 2020;21(5):1207-1216.    DOI: https://doi.org/10.1007/s12239-020-0114-8
         Cited By 2
 Engine and Emissions, Fuels and Lubricants
1217 CENTER FLOOR UNDERCOVER AIR GUIDE DEVELOPMENT TO IMPROVE AERODYNAMIC DRAG FOR A PASSENGER CAR
Se Rok Yang, Hyun A Choi, Ho Gyun Moon, Moon Sang Kim, Ju Yeol You
Int J Automot Technol. 2020;21(5):1217-1222.    DOI: https://doi.org/10.1007/s12239-020-0115-7
      
 Body and Safety, Chassis, Manufacturing, Materials and Recycling
1223 SEATING PROVISION AND CONFIGURATION OF A 12M CITY BUS CONSIDERING PASSENGER CROWDING
Yan Shengyu, Cao Jing, Zhao Zhuanzhuan
Int J Automot Technol. 2020;21(5):1223-1231.    DOI: https://doi.org/10.1007/s12239-020-0116-6
      
 China light-duty vehicle test cycle, Fuel consumption, Type approval
1233 DEVELOPMENT OF CHINA LIGHT-DUTY VEHICLE TEST CYCLE
Yu Liu, Zhi Xin Wu, Hua Zhou, Han Zheng Nan Yu, Xiao Pan An, Jing Yuan Li, Meng Liang Li
Int J Automot Technol. 2020;21(5):1233-1246.    DOI: https://doi.org/10.1007/s12239-020-0117-5
         Cited By 1
 Connected Automated Vehicles and ITS, Electric, Fuel Cell, and Hybrid Vehicle, Vehicle Dynamics and Control
1247 ONLINE OPTIMAL CONTROL STRATEGY METHODOLOGY FOR POWER-SPLIT HYBRID ELECTRIC BUS BASED ON HISTORICAL DATA
Xiaohua Zeng, Zhenwei Wang, Yue Wang, Dafeng Song
Int J Automot Technol. 2020;21(5):1247-1256.    DOI: https://doi.org/10.1007/s12239-020-0118-4
      
 Engine and Emissions, Fuels and Lubricants
1257 STUDY ON TRANSIENT FUEL HYDRODYNAMIC FORCE CHARACTERISTICS OF HIGH-SPEED SOLENOID VALVE FOR COMMON RAIL INJECTOR
Jianhui Zhao, Shunan Zhao, Leonid Grekho
Int J Automot Technol. 2020;21(5):1257-1269.    DOI: https://doi.org/10.1007/s12239-020-0119-3
      
 Electric, Fuel Cell, and Hybrid Vehicle, Electrical and Electronics
1271 ANALYSIS OF THREATS AND COUNTERMEASURES FOR ODOMTER PROTECTION
Seil Kim, Aram Cho, Dong Hoon Lee
Int J Automot Technol. 2020;21(5):1271-1281.    DOI: https://doi.org/10.1007/s12239-020-0120-x
      
 Chassis, Vehicle Dynamics and Control
1283 DEVELOPMENT OF TORQUE VECTORING CONTROL ALGORITHM FOR FRONT WHEEL DRIVEN DUAL MOTOR SYSTEM AND EVALUATION OF VEHICLE DYNAMICS PERFORMANCE
Jae-Young Park, Seung-Jin Heo, Dae-Oh Kang
Int J Automot Technol. 2020;21(5):1283-1291.    DOI: https://doi.org/10.1007/s12239-020-0121-9
      
 Engine and Emissions, Fuels and Lubricants
1293 DEVELOPMENT OF GHG EMISSION FACTOR FOR PASSENGER VEHICLES BY FUEL TYPE AND SIZE CLASS USING STATISTICAL ANALYSIS METHOD
Dojeung Ryu, Charyung Kim, Shibok Lee
Int J Automot Technol. 2020;21(5):1293-1302.    DOI: https://doi.org/10.1007/s12239-018-0122-8
      
 Engine and Emissions, Fuels and Lubricants
1303 NON-NEWTONIAN FLUID APPLICATION OF THE MOBILITY METHOD IN ENGINE JOURNAL BEARING
Minje Park, Siyoul Jang, Kyoungdoug Min
Int J Automot Technol. 2020;21(5):1303-1313.    DOI: https://doi.org/10.1007/s12239-020-0123-7
      
 Engine and Emissions, Fuels and Lubricants
1315 IMPACT OF FOCUS- AND DIFFUSE-TYPE AIR VENTS ON CABIN THERMAL COMFORT
Daewoong Lee, Hoseong Lee
Int J Automot Technol. 2020;21(5):1315-1322.    DOI: https://doi.org/10.1007/s12239-020-0124-6
      
 Engine and Emissions, Fuels and Lubricants
1323 EXPERIMENTAL STUDY ON AN SI ENGINE FUELLED BY LPG/ACETYLENE MIXTURES
Gursel Cinar, Abdelrahman Eldamanhory, Selahaddin Orhan Akansu, Huseyin Enes Fil, Mehmet Ilhan Ilhak
Int J Automot Technol. 2020;21(5):1323-1331.    DOI: https://doi.org/10.1007/s12239-020-0125-5
      
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next