|
Engine and Emissions |
|
|
EFFECT OF PISTON PROFILE ON PISTON MOTION AND LINER BORE POLISHING
Kunjan Sanadhya , Dileep N. Malkhede , Milankumar R. Nandgaonkar , Yogesh V. Aghav , M. N. Kumar
Int J Automot Technol. 2024;25(2):225-233. DOI: https://doi.org/10.1007/s12239-024-00023-9
|
|
|
|
|
Body and Safety, Chassis, Human Factors and Ergonomics, Materials and Recycling, Noise, Vibration and Harshness, Transmission and Driveline, Vehicle Dynamics and Control |
|
|
DUAL CLUTCH TRANSMISSION PERFORMANCE ANALYSIS
USING THE MGMS-GA FRICTION MODEL:
EFFECT OF THE PISTON SEAL
Rashad Mustafa , Ali Abdo , Jamal Siam , Ferit Küçükay
Int J Automot Technol. 2023;24(6):1567-1575. DOI: https://doi.org/10.1007/s12239-023-0126-2
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
DEVELOPMENT OF A NEW MEASUREMENT SYSTEM FOR PISTON
RING FRICTION BASED ON THE FLOATING LINER METHOD
Hyunjung Oh , Kyoung-Pyo Ha , Kyoungdoug Min
Int J Automot Technol. 2023;24(4):1205-1211. DOI: https://doi.org/10.1007/s12239-023-0098-2
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
INVESTIGATION OF FRICTION LOSS CHARACTERISTICS OF ENGINE
PISTONS FOR DIFFERENT ENGINE OPERATING CONDITIONS
Jongdae Kang , Jinwoo Cho , Sungwook Park
Int J Automot Technol. 2023;24(2):503-511. DOI: https://doi.org/10.1007/s12239-023-0042-5
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
REDUCTION OF PISTON SKIRT FRICTION USING THE MICRO-SCALE
PATTERNED SURFACE
Jongdae Kang , Jonghun Yi , Dong Rip Kim , Sungwook Park
Int J Automot Technol. 2023;24(1):15-22. DOI: https://doi.org/10.1007/s12239-023-0002-0
 
|
Cited By 1 |
|
|
|
|
|
Engine and Emissions |
|
|
PATTERNS-BASED COATING OF PISTON SKIRT FOR ADDED BENEFITS DURING HYDRODYNAMIC LUBRICATION IN INTERNAL COMBUSTION ENGINES
Ali Usman , Marcus Liwicki , Andreas Almqvist , Cheol Woo Park
Int J Automot Technol. 2022;23(4):1099-1107. DOI: https://doi.org/10.1007/s12239-022-0096-9
|
|
Cited By 1 |
|
|
|
|
|
Engine and Emissions |
|
|
EFFECTS OF PISTON BOWL GEOMETRIES ON DIESEL AND GASOLINE DUAL-FUEL COMBUSTION UNDER LOW LOAD CONDITIONS
Taewoo Nam , Sanghyun Chu , Sunyoung Moon , Kyoungdoug Min
Int J Automot Technol. 2022;23(4):993-1002. DOI: https://doi.org/10.1007/s12239-022-0086-y
|
|
Cited By 1 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
FRICTION AND WEAR PERFORMANCE OF DOUBLE-BUMP DESIGN OF PISTON SKIRT MAIN THRUST SIDE
Yin Bifeng, Zu Jiajun, Xu Bo, Huang Gongyin, Yang Manying
Int J Automot Technol. 2020;21(6):1579-1586. DOI: https://doi.org/10.1007/s12239-020-0148-y
|
|
Cited By 3 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
EFFECTS OF RING PACK FRICTION HEAT ON TEMPERATURE FIELDS OF PISTON SET-LINER
Long Zhou, Guang Hua Sun, Ying Ying Guo, Min Li Bai
Int J Automot Technol. 2020;21(6):1569-1578. DOI: https://doi.org/10.1007/s12239-020-0147-z
|
|
Cited By 3 |
|
|
|
|
|
Engine and Emissions |
|
|
COMPARISON OF THE SPRAY AND THE SPRAY/WALL INTERACTION OF TWO GASOLINE INJECTORS
Nozzle geometry, Piston wetting, Infrared thermography, Heat transfer, Frank Beyrau
Int J Automot Technol. 2018;19(4):615-622. DOI: https://doi.org/10.1007/s12239-018-0058-4
|
|
Cited By 7 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
THERMOMECHANICAL BEHAVIOR OF THE PISTON OF AN AIRCOOLED DIESEL ENGINE IN SEMI-PERMANENT MODE
T. HEDHLI, J. BESSROUR
Int J Automot Technol. 2016;17(6):947-958. DOI: https://doi.org/10.1007/s12239-016-0092-z
|
|
Cited By 2 |
|
|
|
|
|
Engine, Emission Technology |
|
|
IMPROVING THE EFFICIENCY OF FOUR-STROKE ENGINE WITH USE OF THE PNEUMATIC ENERGY ACCUMULATOR-SIMULATIONS AND EXAMINATION
A. DABROWSKI, M. GLOGOWSKI, P. KUBIAK
Int J Automot Technol. 2016;17(4):581-590. DOI: https://doi.org/10.1007/s12239-016-0058-1
|
|
Cited By 8 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
EFFECT OF A PISTON HOLE UNDER THE SLIP CONTROL CONDITION OF THE LOCK-UP CLUTCH IN A TORQUE CONVERTER
J. D. JANG, I. T. LEE, W. J. KIM, D. M. CHUN
Int J Automot Technol. 2015;16(1):139-144. DOI: https://doi.org/10.1007/s12239-015-0015-4
|
|
Cited By 6 |
|
|
|
|
|
Engine, Emission Technology |
|
|
3D EHD LUBRICATION AND WEAR FOR PISTON RING-CYLINDER LINER ON DIESEL ENGINES
Y. K. JIANG, J. P. ZHANG, G. HONG, L. P. WAN, X. LIU
Int J Automot Technol. 2015;16(1):1-15. DOI: https://doi.org/10.1007/s12239-015-0001-x
|
|
Cited By 21 |
|
|
|
|
|
Engine, Emission Technology |
|
|
FREE PISTON ENGINE GENERATOR: TECHNOLOGY REVIEW AND AN EXPERIMENTAL EVALUATION WITH HYDROGEN FUEL
Y. WOO, Y. J. LEE
Int J Automot Technol. 2014;15(2):229-235. DOI: https://doi.org/10.1007/s12239-014-0024-8
|
|
Cited By 41 |
|
|
|
|
|
Engine, Emission Technology |
|
|
MAJOR SOURCES OF HYDROCARBON EMISSIONS IN A PREMIXED CHARGE COMPRESSION IGNITION ENGINE
G. S. JUNG, Y. H. SUNG, B. CH. CHOI, C. W. LEE, M. T. LIM
Int J Automot Technol. 2012;13(3):347-353. DOI: https://doi.org/10.1007/s12239-012-0032-5
|
|
Cited By 18 |
|
|
|
|
|
Engine, Emission Technology |
|
|
PISTON-TEMPERATURE MEASURING SYSTEM USING ELECTROMAGNETIC INDUCTION WITH VERIFICATION BY A TELEMETRY SYSTEM
H. H. LEE, H. W. BANG, S. K. KAUH, S. I. KIM
Int J Automot Technol. 2011;12(3):351-358. DOI: https://doi.org/10.1007/s12239-011-0041-9
|
|
Cited By 11 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
CAPACITY ESTIMATION OF TORQUE CONVERTERS WITH PISTON HOLES USING THE RESPONSE SURFACE METHOD AND AN ARTIFICIAL NEURAL NETWORK
D. M. CHUN, J. C. LEE, J. C. YEO, S. H. AHN, S. S. HONG, J. D. JANG
Int J Automot Technol. 2011;12(2):273-280. DOI: https://doi.org/10.1007/s12239-011-0032-x
|
|
Cited By 2 |
|
|
|
|
|
Engine, Emission Technology |
|
|
MODIFIED ONE-STEP REACTION EQUATION FOR MODELING THE OXIDATION OF UNBURNED HYDROCARBONS IN ENGINE CONDITIONS
H. KWON, K. MIN
Int J Automot Technol. 2010;11(5):637-650. DOI: https://doi.org/10.1007/s12239-010-0076-3
|
|
Cited By 7 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
PARAMETRIC STUDY OF A FREE PISTON LINEAR ALTERNATOR
Q.-F. LI, J. XIAO, Z. HUANG
Int J Automot Technol. 2010;11(1):111-117. DOI: https://doi.org/10.1007/s12239-010-0015-3
|
|
Cited By 16 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
REDUCTION OF PRESSURE RIPPLES USING A PARALLEL LINE IN HYDRAULIC PIPELINE
K.-H. KIM, J.-S. JANG, D.-S. Jung, H.-E. KIM
Int J Automot Technol. 2005;6(1):65-70.
|
|
|
|
|
Engine, Emission Technology |
|
|
EFFECTS OF SKIRT PROFILES ON THE PISTON SECONDARY MOVEMENTS BY THE LUBRICATION BEHAVIORS
J. CHO, S. JANG
Int J Automot Technol. 2004;5(1):23-31.
|
|
|
|
> Browse Articles > Search
