|
|
|
Engine, Emission Technology |
|
351 |
CFD OPTIMIZATION OF A 2-STROKE RANGE EXTENDER ENGINE
E. MATTARELLI, C. A. RINALDINI, G. CANTORE
Int J Automot Technol. 2015;16(3):351-369. DOI: https://doi.org/10.1007/s12239-015-0037-y
 
|
Cited By 8 |
|
|
|
|
|
Engine, Emission Technology |
|
371 |
CONTROL ORIENTED MODEL OF A LEAN NOx TRAP FOR THE CATALYST REGENERATION IN A 2.2 L DIRECT INJECTION DIESEL ENGINE
M. HAN, B. LEE
Int J Automot Technol. 2015;16(3):371-378. DOI: https://doi.org/10.1007/s12239-015-0038-x
|
|
Cited By 18 |
|
|
|
|
|
Engine, Emission Technology |
|
379 |
DEVELOPMENT OF A NEW EVALUATING METHOD FOR DECIDING A REPRESENTATIVE SMOKE EMISSION OF DIESEL VEHICLE DRIVEN WITH KD147 MODE
K. Y. PARK, C. H. LEE
Int J Automot Technol. 2015;16(3):379-386. DOI: https://doi.org/10.1007/s12239-015-0039-9
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
387 |
SIMULATION STUDY ON REFRIGERATION PERFORMANCE UNDER FROST CONDITION IN A R404A REFRIGERATOR TRUCK TYPE
S. H. KIM, T. J. KIM, Y. C. SHIN, H. H. CHO
Int J Automot Technol. 2015;16(3):387-397. DOI: https://doi.org/10.1007/s12239-015-0040-3
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
399 |
AUTOMOTIVE WASTE HEAT RECOVERY: WORKING FLUID SELECTION AND RELATED BOUNDARY CONDITIONS
S. GLOVER, R. DOUGLAS, L. GLOVER, G. MCCULLOUGH, S. MCKENNA
Int J Automot Technol. 2015;16(3):399-409. DOI: https://doi.org/10.1007/s12239-015-0041-2
|
|
Cited By 13 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
411 |
IMPACT OF A THREE-DIMENSIONAL AIR-CONDITIONING SYSTEMON THERMAL COMFORT: AN EXPERIMENTAL STUDY
D. W. LEE
Int J Automot Technol. 2015;16(3):411-416. DOI: https://doi.org/10.1007/s12239-015-0042-1
|
|
Cited By 14 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
417 |
MODELING AND ANALYSIS OF THE DYNAMIC EFFICIENCY OF MANUAL TRANSMISSION/REDUCER
B. WANG, Z. J. LU, X. B. CHEN, P. WANG
Int J Automot Technol. 2015;16(3):417-426. DOI: https://doi.org/10.1007/s12239-015-0043-0
|
|
Cited By 14 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
427 |
ESTIMATION OF LATERAL DISTURBANCE UNDER PARAMETER UNCERTAINTIES
K. W. KIM, S. B. LEE, C. S. PARK, K. YI
Int J Automot Technol. 2015;16(3):427-433. DOI: https://doi.org/10.1007/s12239-015-0044-z
|
|
Cited By 6 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
435 |
RESEARCH ON VEHICLE STABILITY TECHNOLOGY BASEDON WHEEL FORCE
C. H. JEONG, J. Y. KIM, D. H. JUNG
Int J Automot Technol. 2015;16(3):435-445. DOI: https://doi.org/10.1007/s12239-015-0045-y
|
|
Cited By 11 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
447 |
COMPLICATION ON THE SPECTRUM OF AUTOMOTIVE SWING ARM DUE TO LOW-AMPLITUDE LOADS
Y. F. SHEN, S. L. ZHENG, Z. R. WANG, G. Q. LIANG, Z. G. MA
Int J Automot Technol. 2015;16(3):447-455. DOI: https://doi.org/10.1007/s12239-015-0046-x
|
|
Cited By 4 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
457 |
ACTIVE YAW CONTROL FOR HANDLING PERFORMANCE IMPROVEMENT BY USING TRACTION FORCE
H. KIM, S. LEE, J. K. HEDRICK
Int J Automot Technol. 2015;16(3):457-464. DOI: https://doi.org/10.1007/s12239-015-0047-9
|
|
Cited By 24 |
|
|
|
|
|
Automobile Body and Safety |
|
465 |
INJURY RISK PREDICTION USING ELDERLY DIGITAL HUMAN BODY MODEL
H. Y. CHOI
Int J Automot Technol. 2015;16(3):465-469. DOI: https://doi.org/10.1007/s12239-015-0048-8
|
|
Cited By 2 |
|
|
|
|
|
Fuels and Lubricants |
|
471 |
DIESEL COLD FLOW EVALUATION USING DESIGN OF EXPERIMENT
J.-H. LEE, Y.-Z. LEE
Int J Automot Technol. 2015;16(3):471-478. DOI: https://doi.org/10.1007/s12239-015-0049-7
|
|
Cited By 4 |
|
|
|
|
|
Alternative Energy & Vehicle |
|
479 |
INVESTIGATION OF DEPOSIT FORMATION IN DIRECT-INJECTION SPARK-IGNITION ENGINE POWERED ON SYNGAS
F. Y. HAGOS, A. R. A. AZIZ, S. A. SULAIMAN
Int J Automot Technol. 2015;16(3):479-485. DOI: https://doi.org/10.1007/s12239-015-0050-1
|
|
Cited By 6 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
487 |
REVIEW OF BATTERY ELECTRIC VEHICLE PROPULSION SYSTEMS INCORPORATING FLYWHEEL ENERGY STORAGE
A. DHAND, K. PULLEN
Int J Automot Technol. 2015;16(3):487-500. DOI: https://doi.org/10.1007/s12239-015-0051-0
|
|
Cited By 23 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
501 |
FUEL ECONOMY ASSESSMENT OF NOVEL MULTI-MODE PARALLEL HYBRID ELECTRIC VEHICLE
S. J. KIM, Y.-S. YOON, S. KIM, K.-S. KIM
Int J Automot Technol. 2015;16(3):501-512. DOI: https://doi.org/10.1007/s12239-015-0052-z
|
|
Cited By 12 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
513 |
HYBRID ELECTRIC VEHICLE MODELING ACCURACY VERIFICATION AND GLOBAL OPTIMAL CONTROL ALGORITHM RESEARCH
J. WANG, Q. N. WANG, P. Y. WANG, J. N. WANG, N. W. ZOU
Int J Automot Technol. 2015;16(3):513-524. DOI: https://doi.org/10.1007/s12239-015-0053-y
|
|
Cited By 20 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
525 |
PROTOTYPE VARIABLE TRANSMISSION SYSTEM FOR ELECTRIC VEHICLES: ENERGY CONSUMPTION ISSUES
P. SPANOUDAKIS, N. C. TSOURVELOUDIS
Int J Automot Technol. 2015;16(3):525-537. DOI: https://doi.org/10.1007/s12239-015-0054-x
|
|
Cited By 9 |
|
|
|
|
> Previous issue
