|
|
|
Engine, Emission Technology |
|
173 |
EXPERIMENTAL INVESTIGATION AND HYDRAULIC SIMULATION OF DYNAMIC EFFECTS ON DIESEL INJECTION CHARACTERISTICS IN INDIRECT ACTING PIEZO-DRIVEN INJECTOR WITH BYPASS-CIRCUIT SYSTEM
I. S. JO, M. C. CHUNG, S. M. KIM, G. S. SUNG, J. W. LEE
Int J Automot Technol. 2015;16(2):173-182. DOI: https://doi.org/10.1007/s12239-015-0019-0
 
|
Cited By 15 |
|
|
|
|
|
Engine, Emission Technology |
|
183 |
EXPERIMENTAL STUDY ON REGENERATING FOULED EGR COOLER BY NTPI TECHNOLOGY
Y. Y. CHEN, Y. X. CAI, X. H. LI, Y. X. SHI, Y. ZHENG
Int J Automot Technol. 2015;16(2):183-191. DOI: https://doi.org/10.1007/s12239-015-0020-7
|
|
Cited By 10 |
|
|
|
|
|
Engine, Emission Technology |
|
193 |
SIMULATION OF OXIDATION CATALYST CONVERTER FOR AFTER-TREATMENT IN DIESEL ENGINES
M. N. KABIR, Y. ALGINAHI, K. ISLAM
Int J Automot Technol. 2015;16(2):193-199. DOI: https://doi.org/10.1007/s12239-015-0021-6
|
|
Cited By 12 |
|
|
|
|
|
Engine, Emission Technology |
|
201 |
VISUALIZATIONS OF COMBUSTION AND EMISSIONS CHARACTERISTICS IN A LIGHT-DUTY DIESEL ENGINE WITH ACHIEVED PREMIXED LOW TEMPERATURE COMBUSTION
H. JIA, B. YIN, J. WANG, L. CHEN
Int J Automot Technol. 2015;16(2):201-209. DOI: https://doi.org/10.1007/s12239-015-0022-5
|
|
Cited By 8 |
|
|
|
|
|
Engine, Emission Technology |
|
211 |
OXIDATION KINETICS OF SMALL CI ENGINE'S BIODIESEL PARTICULATE MATTER
P. KARIN, M. BORHANIPOUR, Y. SONGSAENGCHAN, S. LAOSUWAN, C. CHAROENPHONPHANICH, N. CHOLLACOOP, K. HANAMURA
Int J Automot Technol. 2015;16(2):211-219. DOI: https://doi.org/10.1007/s12239-015-0023-4
|
|
Cited By 27 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
221 |
ANALYSIS AND MODELING OF THE THERMAL SOAK PHASE OF A VEHICLE – TEMPERATURE AND HEAT FLUX MEASUREMENTS
M. KHALED, M. G. ELRAB, C. HABCHI, A. AL SHAER, A. ELMARAKBI, F. HARAMBAT, H. PEERHOSSAINI
Int J Automot Technol. 2015;16(2):221-229. DOI: https://doi.org/10.1007/s12239-015-0024-3
|
|
Cited By 3 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
231 |
EFFECT OF HYDRAULIC BRAKE PIPE INNER DIAMETER ON VEHICLE DYNAMICS
S. ABU A. ALBATLAN
Int J Automot Technol. 2015;16(2):231-237. DOI: https://doi.org/10.1007/s12239-015-0025-2
|
|
Cited By 7 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
239 |
INTEGRATED RIDE AND HANDLING VEHICLE MODEL USING LAGRANGIAN QUASI-COORDINATES
A. F. JAHROMI, R. B. BHAT, W. F. XIE
Int J Automot Technol. 2015;16(2):239-251. DOI: https://doi.org/10.1007/s12239-015-0026-1
|
|
Cited By 7 |
|
|
|
|
|
Automobile Body and Safety |
|
253 |
IMPULSE-MOMENTUM BASED ANALYSIS OF VEHICLE COLLISION ACCIDENTS USING MONTE CARLO SIMULATION METHODS
I. HAN
Int J Automot Technol. 2015;16(2):253-270. DOI: https://doi.org/10.1007/s12239-015-0027-0
|
|
Cited By 19 |
|
|
|
|
|
Automobile Body and Safety |
|
271 |
DESIGN OF RACK MODULE FOR CNG PRESSURE VESSEL (TYPE II)
H. S. KWAK, J. H. BAE, C. KIM
Int J Automot Technol. 2015;16(2):271-278. DOI: https://doi.org/10.1007/s12239-015-0028-z
|
|
Cited By 1 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
279 |
LASER TAILOR-WELDED BLANKS FOR HOT-PRESS-FORMING STEEL WITH ARC PRETREATMENT
M. KANG, C. KIM, S. M. BAE
Int J Automot Technol. 2015;16(2):279-283. DOI: https://doi.org/10.1007/s12239-015-0029-y
|
|
Cited By 30 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
285 |
LIFE ESTIMATION OF HOT PRESS FORMING DIE BY USING INTERFACE HEAT TRANSFER COEFFICIENT OBTAINED FROM INVERSE ANALYSIS
D. Y. KIM, H. Y. KIM, S. H. LEE, H. K. KIM
Int J Automot Technol. 2015;16(2):285-292. DOI: https://doi.org/10.1007/s12239-015-0030-5
|
|
Cited By 4 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
293 |
PREDICTION AND MINIMIZATION OF MICRO DEFORMATION ON THE AUTOMOBILE HOOD AFTER DIPPING PROCESS
J. KIM, S. PARK, N. KIM, N. HUR, C. OH
Int J Automot Technol. 2015;16(2):293-300. DOI: https://doi.org/10.1007/s12239-015-0031-4
|
|
Cited By 3 |
|
|
|
|
|
Automobile Electronics |
|
301 |
STATE ESTIMATION FOR MOTORIZED SEAT BELT SYSTEM USING SLIDING-MODE OBSERVER
K. S. LEE, W. T. LEE
Int J Automot Technol. 2015;16(2):301-308. DOI: https://doi.org/10.1007/s12239-015-0032-3
|
|
Cited By 3 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
309 |
CAPACITY FADE MODELING OF A LITHIUM-ION BATTERY FOR ELECTRIC VEHICLES
K. W. BAEK, E. S. HONG, S. W. CHA
Int J Automot Technol. 2015;16(2):309-315. DOI: https://doi.org/10.1007/s12239-015-0033-2
|
|
Cited By 20 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
317 |
LATERAL STABILITY CONTROL OF FULLY ELECTRIC VEHICLES
M. T. EM RLER, K. KAHRAMAN, M. ENT, O. U. ACAR, B. AKSUN GÜVENÇ, L. GÜVENÇ, B. EFEND O LU
Int J Automot Technol. 2015;16(2):317-328. DOI: https://doi.org/10.1007/s12239-015-0034-1
|
|
Cited By 38 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
329 |
OPTIMIZATION OF HOT FORMING PROCESS USING DATA MINING TECHNIQUES AND FINITE ELEMENT METHOD
G. J. ZHENG, J. W. ZHANG, P. HU, D. Y. SHI
Int J Automot Technol. 2015;16(2):329-337. DOI: https://doi.org/10.1007/s12239-015-0035-0
|
|
Cited By 3 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
339 |
NUMERICAL INVESTIGATION OF THE EFFECTS OF CHAMBER BACKPRESSURE ON HFO SPRAY CHARACTERISTICS
M. YOUSEFIFARD, P. GHADIMI, H. NOWRUZI
Int J Automot Technol. 2015;16(2):339-349. DOI: https://doi.org/10.1007/s12239-015-0036-z
|
|
Cited By 12 |
|
|
|
|
> Previous issue
