|
|
|
Engine, Emission Technology |
|
175 |
EXAMINATION OF NANOPARTICLES FROM GASOLINE DIRECT-INJECTION (GDI) ENGINES USING TRANSMISSION ELECTRON MICROSCOPY (TEM)
H. SEONG, S. CHOI, K. LEE
Int J Automot Technol. 2014;15(2):175-181. DOI: https://doi.org/10.1007/s12239-014-0019-5
 
|
Cited By 43 |
|
|
|
|
|
Engine, Emission Technology |
|
183 |
EXPERIMENTAL INVESTIGATION OF B20 COMBUSTION AND EMISSIONS UNDER VARIOUS INTAKE CONDITIONS FOR LOW-TEMPERATURE COMBUSTION
J. KIM, J. JANG, K. LEE, Y. LEE, S. LEE, S. OH
Int J Automot Technol. 2014;15(2):183-189. DOI: https://doi.org/10.1007/s12239-014-0020-z
|
|
Cited By 8 |
|
|
|
|
|
Engine, Emission Technology |
|
191 |
DESIGN OF A COMPRESSOR-POWER-BASED EXHAUST MANIFOLD PRESSURE ESTIMATOR FOR DIESEL ENGINE AIR MANAGEMENT
H. JIN, S. CHOI, S. KIM
Int J Automot Technol. 2014;15(2):191-201. DOI: https://doi.org/10.1007/s12239-014-0021-y
|
|
Cited By 8 |
|
|
|
|
|
Engine, Emission Technology |
|
203 |
REVIEW ON CHARACTERIZATION OF NANO-PARTICLE EMISSIONS AND PM MORPHOLOGY FROM INTERNAL COMBUSTION ENGINES: PART 1
C. L. MYUNG, A. KO, S. PARK
Int J Automot Technol. 2014;15(2):203-218. DOI: https://doi.org/10.1007/s12239-014-0022-x
|
|
Cited By 67 |
|
|
|
|
|
Engine, Emission Technology |
|
219 |
REVIEW ON CHARACTERIZATION OF NANO-PARTICLE EMISSIONS AND PM MORPHOLOGY FROM INTERNAL COMBUSTION ENGINES: PART 2
S. CHOI, C. L. MYUNG, S. PARK
Int J Automot Technol. 2014;15(2):219-227. DOI: https://doi.org/10.1007/s12239-014-0023-9
|
|
Cited By 54 |
|
|
|
|
|
Engine, Emission Technology |
|
229 |
FREE PISTON ENGINE GENERATOR: TECHNOLOGY REVIEW AND AN EXPERIMENTAL EVALUATION WITH HYDROGEN FUEL
Y. WOO, Y. J. LEE
Int J Automot Technol. 2014;15(2):229-235. DOI: https://doi.org/10.1007/s12239-014-0024-8
|
|
Cited By 41 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
237 |
DYNAMIC FAILURE CHARACTERIZATION OF LASER WELDS UNDER COMBINED LOADING CONDITIONS
J. HA, H. HUH
Int J Automot Technol. 2014;15(2):237-252. DOI: https://doi.org/10.1007/s12239-014-0025-7
|
|
Cited By 1 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
253 |
CO-OPERATIVE CONTROL FOR REGENERATIVE BRAKING AND FRICTION BRAKING TO INCREASE ENERGY RECOVERY WITHOUT WHEEL LOCK
J. W. KO, S. Y. KO, I. S. KIM, D. Y. HYUN, H. S. KIM
Int J Automot Technol. 2014;15(2):253-262. DOI: https://doi.org/10.1007/s12239-014-0026-6
|
|
Cited By 62 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
263 |
DEVELOPMENT OF A MODEL OF THE DUAL CLUTCH TRANSMISSION IN AUTONOMIE AND VALIDATION WITH DYNAMOMETER TEST DATA
NAMDOO KIM, H. LOHSE-BUSCH, A. ROUSSEAU
Int J Automot Technol. 2014;15(2):263-271. DOI: https://doi.org/10.1007/s12239-014-0027-5
|
|
Cited By 11 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
273 |
OBJECTIVE EVALUATION OF HUMAN PERCEPTION OF AUTOMOTIVE SOUND BASED ON PHYSIOLOGICAL SIGNAL OF HUMAN BRAIN
S. M. LEE, S. K. LEE
Int J Automot Technol. 2014;15(2):273-282. DOI: https://doi.org/10.1007/s12239-014-0028-4
|
|
Cited By 26 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
283 |
IMPACT OF HILLY ROAD INFORMATION ON FUEL ECONOMY OF FCHEV BASED ON PARAMETERIZATION OF HILLY ROADS
J. HAN, D. KUM, Y. PARK
Int J Automot Technol. 2014;15(2):283-290. DOI: https://doi.org/10.1007/s12239-014-0029-3
|
|
Cited By 12 |
|
|
|
|
|
Automobile Body and Safety |
|
291 |
INNOVATIVE DESIGN OPTIMIZATION STRATEGY FOR THE AUTOMOTIVE INDUSTRY
M. S. KIM, D. O. KANG, S. J. HEO
Int J Automot Technol. 2014;15(2):291-301. DOI: https://doi.org/10.1007/s12239-014-0030-x
|
|
Cited By 20 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
303 |
IN-SITU MEASUREMENT OF LOADING STRESSES WITH X-RAY DIFFRACTION FOR YIELD LOCUS DETERMINATION
A. GÜNER, B. ZILLMANN, T. LAMPKE, A. E. TEKKAYA
Int J Automot Technol. 2014;15(2):303-316. DOI: https://doi.org/10.1007/s12239-014-0031-9
|
|
Cited By 10 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
317 |
FATIGUE LIFE PREDICTION OF A RUBBER MATERIAL BASED ON DYNAMIC CRACK GROWTH CONSIDERING SHEAR EFFECT
H. J. KIM, M. W. SONG, H. I. MOON, H. KIM, H. Y. KIM
Int J Automot Technol. 2014;15(2):317-324. DOI: https://doi.org/10.1007/s12239-014-0032-8
|
|
Cited By 8 |
|
|
|
|
|
Automobile Electronics |
|
325 |
APPROACH TO FUNCTIONAL SAFETY-COMPLIANT ECU DESIGN FOR ELECTRO-MECHANICAL BRAKE SYSTEMS
K. J. LEE, Y. H. KI, J. S. CHEON, G. HWANG, H. S. AHN
Int J Automot Technol. 2014;15(2):325-332. DOI: https://doi.org/10.1007/s12239-014-0033-7
|
|
Cited By 18 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
333 |
IN-VEHICLE TECHNOLOGY FOR SELF-DRIVING CARS: ADVANTAGES AND CHALLENGES FOR AGING DRIVERS
J. YANG, J. F. COUGHLIN
Int J Automot Technol. 2014;15(2):333-340. DOI: https://doi.org/10.1007/s12239-014-0034-6
|
|
Cited By 114 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
341 |
DEVELOPMENT OF AN AUTONOMOUS BRAKING SYSTEM USING THE PREDICTED STOPPING DISTANCE
D. H. LEE, S. K. KIM, C. S. KIM, K. S. HUH
Int J Automot Technol. 2014;15(2):341-346. DOI: https://doi.org/10.1007/s12239-014-0035-5
|
|
Cited By 34 |
|
|
|
|
> Previous issue
