|
Intelligent Vehicle / Transportation Systems |
|
|
DEMONSTRATION OF VEHICULAR VISIBLE LIGHT COMMUNICATION BASED ON LED HEADLAMP
J.-H. YOO, J.-S. JANG, J. K. KWON, H.-C. KIM, D.-W. SONG, S.-Y. JUNG
Int J Automot Technol. 2016;17(2):347-352. DOI: https://doi.org/10.1007/s12239-016-0035-8
 
|
Cited By 56 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
ANALYSIS OF AUTOMOTIVE DISC BRAKE SQUEAL CONSIDERING DAMPING AND DESIGN MODIFICATIONS FOR PADS AND A DISC
C. KIM, K. ZHOU
Int J Automot Technol. 2016;17(2):213-223. DOI: https://doi.org/10.1007/s12239-016-0021-1
|
|
Cited By 28 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
EFFECT OF STEADY AIRFLOW FIELD ON DRAG AND DOWNFORCE
S. C. KIM, S. Y. HAN
Int J Automot Technol. 2016;17(2):205-211. DOI: https://doi.org/10.1007/s12239-016-0020-2
|
|
Cited By 7 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
JERK PHENOMENON OF THE HYDROSTATIC TRANSMISSION THROUGH THE EXPERIMENT AND ANALYSIS
D. M. KIM, S. C. KIM, D. K. NOH, J. S. JANG
Int J Automot Technol. 2015;16(5):783-790. DOI: https://doi.org/10.1007/s12239-015-0079-1
|
|
Cited By 11 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
LASER TAILOR-WELDED BLANKS FOR HOT-PRESS-FORMING STEEL WITH ARC PRETREATMENT
M. KANG, C. KIM, S. M. BAE
Int J Automot Technol. 2015;16(2):279-283. DOI: https://doi.org/10.1007/s12239-015-0029-y
|
|
Cited By 30 |
|
|
|
|
|
Automobile Body and Safety |
|
|
DESIGN OF RACK MODULE FOR CNG PRESSURE VESSEL (TYPE II)
H. S. KWAK, J. H. BAE, C. KIM
Int J Automot Technol. 2015;16(2):271-278. DOI: https://doi.org/10.1007/s12239-015-0028-z
|
|
Cited By 1 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
COOLING PERFORMANCE OF 25 KW IN-WHEEL MOTOR FOR ELECTRIC VEHICLES
S. C. KIM
Int J Automot Technol. 2013;14(4):559-567. DOI: https://doi.org/10.1007/s12239-013-0060-9
|
|
Cited By 45 |
|
|
|
|
|
Automobile Body and Safety |
|
|
PILOT STUDY ON CONSTRUCTING A REAL-WORLD, IN-DEPTH DATABASE OF OCCUPANT INJURY AND VEHICLE DAMAGE AFTER A DOMESTIC MOTOR VEHICLE CRASH ACCIDENT
S. C. KIM, K. H. LEE, H. Y. CHOI, B. W. KIM, H. S. JUNG
Int J Automot Technol. 2013;14(3):407-413. DOI: https://doi.org/10.1007/s12239-013-0044-9
|
|
Cited By 1 |
|
|
|
|
|
Automobile Electronics |
|
|
DESIGN AND IMPLEMENTATION OF A UPNP-CAN GATEWAY FOR AUTOMOTIVE ENVIRONMENTS
H. S. SEO, B. C. KIM, P. S. PARK, C. D. LEE, S. S. LEE
Int J Automot Technol. 2013;14(1):91-99. DOI: https://doi.org/10.1007/s12239-013-0011-5
|
|
Cited By 10 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
EXPERIMENTAL STUDIES ON THE HEATING PERFORMANCE OF THE PTC HEATER AND HEAT PUMP COMBINED SYSTEM IN FUEL CELLS AND ELECTRIC VEHICLES
K. Y. KIM, S. C. KIM, M. S. KIM
Int J Automot Technol. 2012;13(6):971-977. DOI: https://doi.org/10.1007/s12239-012-0099-z
|
|
Cited By 63 |
|
|
|
|
|
Engine, Emission Technology |
|
|
COOLING PERFORMANCE EVALUATION OF HEIGHT-DOWNSIZED FRONT END MODULE FOR PEDESTRIAN PROTECTION
S. C. KIM, M. S. KIM
Int J Automot Technol. 2012;13(4):533-539. DOI: https://doi.org/10.1007/s12239-012-0051-2
|
|
Cited By 1 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
PREDICTION OF THE DIMENSIONAL DEFORMATION OF THE ADDENDUM AND DEDENDUM AFTER THE WARM SHRINK FITTING PROCESS USING A CORRECTION COEFFICIENT
J. H. BAE, J. S. KIM, B. C. HWANG, W. B. BAE, M. S. KIM, C. KIM
Int J Automot Technol. 2012;13(2):285-291. DOI: https://doi.org/10.1007/s12239-012-0026-3
|
|
Cited By 11 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
PERFORMANCE CHARACTERISTICS OF A SUPPLEMENTARY STACKCOOLING SYSTEM FOR FUEL-CELL VEHICLES USING A CARBON DIOXIDE AIR-CONDITIONING UNIT
S. C. KIM, J. C. PARK, M. S. KIM
Int J Automot Technol. 2010;11(6):893-900. DOI: https://doi.org/10.1007/s12239-010-0106-1
|
|
Cited By 12 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
IMPROVED METHOD FOR ANALYZING AUTOMOTIVE TRANSMISSION PARTS (SHAFT/GEAR) MANUFACTURED USING THE WARM SHRINK FITTING PROCESS
T. J. KIM, H. Y. KIM, B. C. HWANG, H. J. KANG, C. KIM
Int J Automot Technol. 2009;10(5):611-618.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
PREDICTION OF VIBRATING FORCES ON MESHING GEARS FOR A GEAR RATTLE USING A NEW MULTI-BODY DYNAMIC MODEL
B. K. HAN, M. K. CHO, C. KIM, C. H. LIM, J. J. KIM
Int J Automot Technol. 2009;10(4):469-474.
|
|
|
|
|
Engine, Emission Technology |
|
|
EXPERIMENTAL INVESTIGATION AND COMPARISON OF NANOPARTICLE EMISSION CHARACTERISTICS IN LIGHT-DUTY VEHICLES FOR TWO DIFFERENT FUELS
J. W. LEE, Y. I. JEONG, M. W. JUNG, K. O. CHA, S. I. KWON, J. C. KIM, S. PARK
Int J Automot Technol. 2008;9(4):397-403.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
ANALYSIS PROCESS OF A STEERING SYSTEM USING A CONCEPT MODEL FOR IDLE VIBRATION
K. C. KIM, C. M. KIM
Int J Automot Technol. 2008;9(3):337-346.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
ANALYSIS PROCESS APPLIED TO A HIGH STIFFNESS BODY FOR IMPROVED VEHICLE HANDLING PROPERTIES
K. C. KIM, C. M. KIM
Int J Automot Technol. 2007;8(5):629-636.
|
|
|
|
|
Automobile Body and Safety |
|
|
DESIGN OPTIMIZATION OF AUTOMOTIVE LOCK-UP CLUTCHES WITH DAMPER SPRINGS USING SIMULATED ANNEALING, FEM, AND B-SPLINE CURVES
C. KIM, J. W. YOON
Int J Automot Technol. 2007;8(5):599-603.
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
DURABILITY IMPROVEMENT OF A CYLINDER HEAD IN CONSIDERATION OF MANUFACTURING PROCESS
B. KIM, H. CHANG, K. LEE, C. KIM
Int J Automot Technol. 2007;8(2):243-248.
|
|
|
|
|
Automobile Body and Safety |
|
|
PROCESS OF DESIGNING BODY STRUCTURES FOR THE REDUCTION OF REAR SEAT NOISE IN PASSENGER CAR
K. C. KIM, C. M. KIM
Int J Automot Technol. 2007;8(1):67-73.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
Development of an Optimization Technique of a warm Shrink Fitting Process for an Automotive Transmission Parts
H. Y. KIM, C. KIM, W. B. BAE
Int J Automot Technol. 2006;7(7):847-852.
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
EFFICIENCY MEASUREMENT AND ENERGY ANALYSIS FOR A HEV BENCH TESTER AND DEVELOPMENT OF PERFORMANCE SIMULATOR
K. OH, D. KIM, T. KIM, C. KIM, H. KIM
Int J Automot Technol. 2005;6(5):537-544.
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
INFLUENCE OF ALR ON DISINTEGRATION CHARACTERISTICS IN PNEUMATIC SPRAY
B. J. RHO, S. G. LEE, B. C. JOO, K. C. KIM
Int J Automot Technol. 2000;1(2):95-100.
|
|
|
|
> Browse Articles > Search
