| COMPARISON OF THE OPTIMUM DESIGNS OF CENTER PILLAR ASSEMBLY OF AN AUTO-BODY BETWEEN CONVENTIONAL STEEL AND AHSS WITH A SIMPLIFIED SIDE IMPACT ANALYSIS |
| G. H. BAE, H. HUH |
| KAIST |
|
|
|
|
| |
| ABSTRACT |
|
This study compares the optimum designs of center pillar assembly with advanced high-strength steel (AHSS) to that of conventional steel for crashworthiness and weight reduction in side impacts. A simplified side impact analysis method was used to simulate the crash behavior of the center pillar assembly with efficient computing time. Thickness optimization aims to perform an S-shaped deformation of the center pillar toward the cabin to reduce the injury level of a driver in a crash test. Center pillar members were regarded as an assembly of parts that are fabricated with tailor-welded blanks, and the thickness of each part was selected as a design variable. The thickness variables of parts that have significant effects on the deformation mechanism were extracted as the main design variables for thickness optimization based on the results of a sensitivity analysis with design of experiments. The optimization condition was constructed to induce an S-shaped deformation mode and reduce the weight of the center pillar assembly. An optimum design was obtained after several iterations with response surface methodology (RSM). Optimization was first performed with conventional steel and then with AHSS with the same procedure to optimize the crashworthiness of the center pillar assembly. After thickness optimization, optimum designs were applied to the full vehicle analysis to evaluate the validity of the optimization scheme with the simplified side impact analysis method. Then, the crashworthiness of optimum designs with conventional steel and AHSS were compared using the full vehicle analysis. This comparison demonstrates that AHSS can be more effectively utilized than conventional steel to obtain a lightweight design of an auto-body with enhanced crashworthiness. |
| Key Words:
Side impact analysis, Simplified center pillar model, Optimum design, S-shaped deformation, Advanced high-strength steel |
|
|
|
Preview
Full text via DOI
Download Citation 
Print 
