| Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
International Journal of Automotive Technology > Volume 11(4); 2010 > Article
International Journal of Automotive Technology 2010;11(4): 481-488.
doi: https://doi.org/10.1007/s12239-010-0059-4
STOCHASTIC ANALYSIS OF THE VARIATION IN INJURY NUMBERS OF AUTOMOBILE FRONTAL CRASH TESTS
T.-W. KIM, H.-Y. JEONG
Sogang University
ABSTRACT
Although automobile crash test data have a comparatively large variation because of the complexity of the tests, only a limited number of crash tests are usually conducted due to monetary and time limitations. Thus, it is necessary to control input variables that cause the variation in test data to obtain consistent crash test results and to correctly assess the safety performance of an automobile under development. In this study, a MADYMO model was validated deterministically to yield the head, chest, pelvis deceleration pulses of anthropomorphic test devices and the belt load pulses similar to those from actual tests, and it was also validated stochastically to yield means and standard deviations of the head and chest injury numbers, i.e., HIC15 and 3 msec clip similar to those from actual tests. A stochastic analysis was conducted using the validated MADYMO model to calculate the sensitivity of the standard deviations of the injury numbers to the standard deviations of influential input variables to determine the most influential input variable that makes the largest contribution to the variation in the injury numbers. Moreover, the Taguchi approach was used to determine the optimal values of the influential input variables to improve safety performance.
Key Words: Stochastic analysis, Frontal crash test, HIC15, 3 msec clip, Taguchi approach
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next