| Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
International Journal of Automotive Technology > Volume 23(3); 2022 > Article
International Journal of Automotive Technology 2022;23(3): 741-763.
doi: https://doi.org/10.1007/s12239-022-0067-1
RECENT DEVELOPMENTS AND TRENDS IN FLEXIBLE FORMING TECHNOLOGY
Hyungrim Lee 1,2, Namsu Park 1, Minki Kim 1, Myoung-Gyu Lee 2, Jung Han Song 1
1KITECH
2Seoul National University
PDF Links Corresponding Author.  Jung Han Song  , Email. jhsong@kitech.re.kr
ABSTRACT
Flexible metal forming processes are novel ways to meet the growing needs for maintaining economic feasibility in mass production and customization. The flexible forming processes inherently have more process parameters to control than conventional processes, and thus they may be less economical. However, owing to the rapid development of computing technology over the last two decades, the numerical simulation approach has gained significant attention for optimizing the process parameters. Based on the numerical analysis, sophisticated theories have also been developed to describe the material deformation characteristics during forming processes. In this paper, incremental sheet metal forming, incremental bulk forming, and flexible roll forming are briefly overviewed with regard to innovative techniques for numerical simulations of various flexible metal forming processes.
Key Words: Flexible metal forming, Incremental sheet metal forming, Incremental bulk forming, Flexible roll forming, Innovative forming technique, Finite element simulation
TOOLS
Preview  Preview
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
  Print
Share:      
METRICS
0
Scopus
433
View
19
Download
Related articles
DEVELOPMENT OF CRASH PAD USING OVERMOLDING TECHNOLOGY  2022 December;23(6)
DEVELOPMENT AND ANALYSIS OF AN AIR SPRING MODEL  2010 August;11(4)
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next