| Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
International Journal of Automotive Technology > Volume 22(6); 2021 > Article
International Journal of Automotive Technology 2021;22(6): 1475-1483.
doi: https://doi.org/10.1007/s12239-021-0127-y
ROBUST VEHICLE SPEED LIMITER USING DISTURBANCE AND SPEED OBSERVER
Sangjoon Kim1,2, Huiun Son1, Hyeongcheol Lee2
1Hyundai Motor Company
2Hanyang University
PDF Links Corresponding Author.  Hyeongcheol Lee , Email. hclee@hanyang.ac.kr
ABSTRACT
This paper presents a practical approach to developing a speed limiter using a disturbance observer (DOB) and a speed observer. A nominal plant model is designed assuming that the vehicle is a lumped mass. The plant uncertainty and external disturbance are lumped into a disturbance term and compensated for by the DOB. With the contribution of the DOB, the proposed controller can reduce overshoot and minimize steady-state error without feedforward and integrator control. In addition, the speed observer is also designed to reduce the overshoot due to noise such as offset, lag, and communication delay between the display speed and wheel speed, because the proposed controller operates according to the display speed. The proposed controller was validated by vehicle experiments performed on a C-segment hybrid electric vehicle (HEV) and achieved superior performance compared to conventional controllers.
Key Words: Speed limiter, Disturbance observer, Speed observer, Hybrid electric vehicle
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next