| Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
International Journal of Automotive Technology > Volume 18(3); 2017 > Article
International Journal of Automotive Technology 2017;18(3): 365-375.
doi: https://doi.org/10.1007/s12239-017-0037-1
LIGHTWEIGHT MIXTURE FAULTS DETECTION METHOD FOR GASOLINE ENGINE USING ON-LINE TREND ANALYSIS
Shili Wu1, Zhenmin Tang2, Zhaosong Guo3
1Nanjing Univeristy of Science & Technology
2Zhenmin Tang
3Nanjing Vocational Institute of Transport Technology
ABSTRACT
Mixture faults detection is meaningful for gasoline engines because proper mixture is the basic prerequisite for healthy running of a combustion engine. Among existing methods for faults detection, the data-driven trend analysis technique is widely used due to the simplicity and efficiency in time-domain. The CUSUM (Cumulative Sum Of Errors) algorithm is good at real-time trend extraction, but it’s easy to be costly on the fuel trim signal during the engine in normal working conditions, which will increase battery energy consumption because engine failure is rarely occurs. Hence, the conventional treatment methods of artifacts in the CUSUM algorithm are modified by means of decay function and detection time analysis. The thresholds are tuned according to the characteristics of artifacts instead of residual variability, which leads to better results of trend extraction and less computation. Then, the revised CUSUM algorithm is used for monitoring the mixture abnormal behaviors, and the mixture faults can be detected in real time through analyzing the variation features of fuel trim signal. The lightweight faults detector using the advanced CUSUM algorithm (FD-A-CUSUM) is evaluated on the experimental data collected from a Ford engine. The validation results show that while engine works under normal conditions, the computation of FD-A-CUSUM has decreased by 72.79 % in comparison with the detection method using the original CUSUM algorithm (FD-O-CUSUM), and the false alarm ratio of FD-A-CUSUM is 3.37 %. Futhermore, the detection results of FD-A-CUSUM for two leakage faults have achieved 91.18 % test accuracy.
Key Words: Mixture fault, Lightweight, Trend extraction, On-line detection, CUSUM
TOOLS
Preview  Preview
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
  E-Mail
  Print
Share:      
METRICS
2
Scopus
518
View
3
Download
Related article
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: car@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers. All rights reserved.                
Close layer
prev next