|
|
|
Engine, Emission Technology |
|
641 |
PARAMETRIC STUDY OF THE MAIN PARAMETERS INFLUENCING THECATALYTIC EFFICIENCY OF A DIESEL OXIDATION CATALYST: PARAMETERS INFLUENCING THE EFFICIENCY OF A DIESEL CATALYST
E. ZERVAS
Int J Automot Technol. 2008;9(6):641-647.
|
|
|
|
|
Engine, Emission Technology |
|
649 |
EFFECT OF INTAKE VALVE SWIRL ON FUEL-GAS MIXING AND SUBSEQUENT COMBUSTION IN A CAI ENGINE
J. N. KIM, H. Y. KIM, S. S. YOON, S. D. SA
Int J Automot Technol. 2008;9(6):649-657.
|
|
|
|
|
Engine, Emission Technology |
|
659 |
COMPUTATIONAL STUDY ON THE EFFECTS OF VOLUME RATIO OF DOC/DPF AND CATALYST LOADING ON THE PM AND NOX EMISSION CONTROL FOR HEAVY-DUTY DIESEL ENGINES
S. J. LEE, S. J. JEONG, W. S. KIM, C. B. LEE
Int J Automot Technol. 2008;9(6):659-670.
|
|
|
|
|
Engine, Emission Technology |
|
671 |
EFFECT OF FUEL STRATIFICATION ON INITIAL FLAME DEVELOPMENT: PART 2-LOW SWIRL CONDITION
I. Y. OHM, C. J. PARK
Int J Automot Technol. 2008;9(6):671-678.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
679 |
EVALUATION OF A VEHICLE DIRECTIONAL CONTROL WITH A FRACTIONAL ORDER PDμ CONTROLLER
D.-J. ZHUANG, F. YU, and Y. LIN
Int J Automot Technol. 2008;9(6):679-685.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
687 |
ANALYSIS OF HANDLING PERFORMANCE BASED ON SIMPLIFIED LATERAL VEHICLE DYNAMICS
J. KIM
Int J Automot Technol. 2008;9(6):687-693.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
695 |
DEVELOPMENT OF AN ACTIVE FRONT STEERING (AFS) SYSTEM WITH QFT CONTROL
J.-Y. ZHANG, J.-W. KIM, K.-B. LEE, Y.-B. KIM
Int J Automot Technol. 2008;9(6):695-702.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
703 |
EXCITATION FORCE ANALYSIS OF A POWERTRAIN BASED ON CAE TECHNOLOGY
S. J. KIM, S. G. KIM, K. S. OH, S. K. LEE
Int J Automot Technol. 2008;9(6):703-711.
|
|
|
|
|
Automobile Body and Safety |
|
713 |
EFFECT OF STRUCTURAL VARIABLES ON AUTOMOTIVE BODY BUMPER IMPACT BEAM
K. J. KIM, S. T. WON
Int J Automot Technol. 2008;9(6):713-717.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
719 |
ERGONOMIC AND BIOMECHNICAL ANALYSIS OF AUTOMOTIVE GENERAL ASSEMBLY USING XML AND DIGITAL HUMAN MODELS
Y. H. RIM, J. H. Mun, G. Y. KIM, S. D. NOH
Int J Automot Technol. 2008;9(6):719-728.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
729 |
FATIGUE DESIGN FOR PLUG/RING TYPE GAS WELDED JOINTS OF STS301L INCLUDING WELDING RESIDUAL STRESSES
S. Y. BAEK, D. H. BAE, H. KIM
Int J Automot Technol. 2008;9(6):729-734.
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
735 |
AUTO-IGNITION AND MICRO-EXPLOSION BEHAVIORS OF DROPLET ARRAYS OF WATER-IN-FUEL EMULSION
I. C. JEONG, K. H. LEE
Int J Automot Technol. 2008;9(6):735-740.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
741 |
PREDICTION OF FATIGUE LIFE AND ESTIMATION OF ITS RELIABILITY ON THE PARTS OF AN AIR SUSPENSION SYSTEM
K. J. JUN, T. W. PARK, S. H. LEE, S. P. JUNG, J. W. YOON
Int J Automot Technol. 2008;9(6):741-747.
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
749 |
COMBINED CONTROL OF A REGENERATIVE BRAKING AND ANTILOCK BRAKING SYSTEM FOR HYBRID ELECTRIC VEHICLES
D. PENG, Y. ZHANG, C.-L. YIN, J.-W. ZHANG
Int J Automot Technol. 2008;9(6):749-757.
|
|
|
|
|
Automobile Electronics |
|
759 |
ESTIMATION OF BATTERY STATE-OF-CHARGE USING ν-SUPPORT VECTOR REGRESSION ALGORITHM
Q.-S. SHI, C.-H. ZHANG, N.-X. CUI
Int J Automot Technol. 2008;9(6):759-764.
|
|
|
|
> Previous issue
