|
Alternative Energy & Vehicle |
645 |
Combustion And Emission Characteristics of a Turbocharged Diesel Engine Fuelled with Dimethyl Ether
J. WU, Z. HUANG, X. QIAO, J. LU, L. ZHANG, J. ZHANG
Int J Automot Technol. 2006;7(6):645-652.
|
|
|
|
Engine, Emission Technology |
653 |
Combined Effects of BD20, Low Surfur Diesel Fuel and Diesel Oxidation Catalyst in a HD Diesel Engine
D. S. BAIK
Int J Automot Technol. 2006;7(6):653-658.
|
|
|
|
Engine, Emission Technology |
659 |
Low Pressure Loof EGR System Analysis using Simulation and Experimental Investigation in Heavy-Duty Diesel Engine
S. J. LEE, K. S. LEE, S. H. SONG, K. M. CHUN
Int J Automot Technol. 2006;7(6):659-666.
|
|
|
|
Engine, Emission Technology |
667 |
Effects of Trace Metals on Particulate Matter Formation in a Diesel Engine: Metal Contents from Ferrocene and Lube Oil
D. G. LEE, A. MILLER, K. H. PARK, M. R. ZACHARIAH
Int J Automot Technol. 2006;7(6):667-673.
|
|
|
|
Engine, Emission Technology |
675 |
Experimental Study on the Stratified Combustion Characteristics according to Compression Ratio and Intake Temperature in a Dig Engine
C. H. LEE, K. H. LEE
Int J Automot Technol. 2006;7(6):675-680.
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
681 |
Technique of Separate Measuring Side Slip for Toe Angle and Camber Angle
H. NOZAKI
Int J Automot Technol. 2006;7(6):681-686.
|
|
|
|
Intelligent Vehicle / Transportation Systems |
687 |
Development of a Network-based Traction Control System, Validation of its Traction Control Algorithm and Evaluation of its Performance Using Net-HILS
J. RYU, M. YOON, M. SUNWOO
Int J Automot Technol. 2006;7(6):687-695.
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
697 |
Critical Speed Analysis of Juddering Due to Change in Surface Temperature of Disk Brake
M.-G. KIM, C. CHO
Int J Automot Technol. 2006;7(6):697-702.
|
|
|
|
Automobile Body and Safety |
703 |
Sensitivity Analysis of SUV Parameters on Rollover Propensity
B. C. JANG, R. P. MARIMUTHU
Int J Automot Technol. 2006;7(6):703-714.
|
|
|
|
Automobile Body and Safety |
715 |
Experimental Evaluation of Used Cars for Frontal Collision Compatibility
J. H. LIM, I. S. PARK, S. J. HEO
Int J Automot Technol. 2006;7(6):715-720.
|
|
|
|
Other Fields of Automotive Engineering |
721 |
Development of Digital Assembly Cell for Laser Welding of Side Panels
H.-S. PARK, H.-B. LEE
Int J Automot Technol. 2006;7(6):721-728.
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
729 |
Active Fault-tolerant Control of Induction Motor Drives in EV and HEV against Sensor Failures Using a Fuzzy Decision System
M. E. H. BENBOUZID, D. DIALLO, M. ZERAOULIA, F. ZIDANI
Int J Automot Technol. 2006;7(6):729-739.
|
|
|
|
Materials and Recycling, Manufacturing |
741 |
Fatigue Life Prediction of Rubber Materials using Tearing Energy
H. KIM, H. Y. KIM
Int J Automot Technol. 2006;7(6):741-747.
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
749 |
Complex Stochastic Wheelbase Preview Control and Simulation of a Semi-active Motorcycle Suspension Based on Hierarchical Modeling Method
L. WU, H.-L. CHEN
Int J Automot Technol. 2006;7(6):749-756.
|
|
|
|
Other Fields of Automotive Engineering |
757 |
Development of an Accelerated Life Test Procedure for Cooling Fan Motors
W. G. SHIN, S. H. LEE, Y. S. SONG
Int J Automot Technol. 2006;7(6):757-762.
|
|
|
|