Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Previous issue > Previous issue



Table of Contents | December, 2015  Vol. 16 No. 6 Previous Issue | Next Issue | Archive
Articles
 Engine, Emission Technology
895 IMPACT OF FUEL, INJECTION TYPE AND AFTER-TREATMENT SYSTEM ON PARTICULATE EMISSIONS OF LIGHT-DUTY VEHICLES USING DIFFERENT FUELS ON FTP-75 AND HWFET TEST CYCLES
C. OH, G. CHA
Int J Automot Technol. 2015;16(6):895-901.    DOI: https://doi.org/10.1007/s12239-015-0091-5
         Cited By 14
 Engine, Emission Technology
903 COMBUSTION AND EMISSION CHARACTERISTICS OF WOOD PYROLYSIS OIL-BUTANOL BLENDED FUELS IN A DI DIESEL ENGINE
T. Y. KIM, S. H. LEE
Int J Automot Technol. 2015;16(6):903-912.    DOI: https://doi.org/10.1007/s12239-015-0092-4
         Cited By 17
 Engine, Emission Technology
913 IMPROVEMENT OF EXHAUST GAS PRESSURE’S UTILIZATION FOR COMPRESSING THE INTAKE AIR IN DIESEL ENGINE’S CYLINDERS
C. I. LEAHU
Int J Automot Technol. 2015;16(6):913-921.    DOI: https://doi.org/10.1007/s12239-015-0093-3
         Cited By 5
 Heat Transfer, Fluid and Thermal Engineering
923 EXPERIMENTAL STUDY ON THE HEAT PUMP SYSTEM USING R134a REFRIGERANT FOR ZERO-EMISSION VEHICLES
D. LEE
Int J Automot Technol. 2015;16(6):923-928.    DOI: https://doi.org/10.1007/s12239-015-0094-2
         Cited By 19
 Other Fields of Automotive Engineering
929 QUALITY INDEX OF DUAL SHELL HORNS OF PASSENGER CARS BASED ON A SPECTRUM DECAY SLOPE
H. S. KANG, T. SHIN, D. C. PARK, S. K. LEE
Int J Automot Technol. 2015;16(6):929-938.    DOI: https://doi.org/10.1007/s12239-015-0095-1
         Cited By 7
 Automobile Chassis & Vehicle Dynamic
939 PERFORMANCE EVALUATION OF INTEGRATED CONTROL OF DIRECT YAW MOMENT AND SLIP RATIO CONTROL FOR ELECTRIC VEHICLE WITH REAR IN-WHEEL MOTORS ON SPLIT-MU ROAD
C. J. KIM, A. A. MIAN, S. H. KIM, S. H. BACK, H. B. JANG, J. H. JANG, C. S. HAN
Int J Automot Technol. 2015;16(6):939-946.    DOI: https://doi.org/10.1007/s12239-015-0096-0
         Cited By 11
 Automobile Body and Safety
947 MULTI-OBJECTIVE OPTIMIZATION OF SOUND PACKAGE PARAMETERS FOR INTERIOR HIGH FREQUENCY NOISE OF HEAVY-DUTY TRUCK USING GREY THEORY
S. CHEN, G. CHEN, D. WANG, J. SONG
Int J Automot Technol. 2015;16(6):947-957.    DOI: https://doi.org/10.1007/s12239-015-0097-z
         Cited By 3
 Automobile Body and Safety
959 OPTIMAL DESIGN OF VEHICLE STRUCTURE FOR IMPROVING SMALL-OVERLAP RATING
P. T. L. NGUYEN, J. Y. LEE, H. J. YIM, H. K. KIM, S. B. LEE, S. J. HEO
Int J Automot Technol. 2015;16(6):959-965.    DOI: https://doi.org/10.1007/s12239-015-0098-y
         Cited By 12
 Materials and Recycling, Manufacturing
967 DETERMINATION OF STIFFNESS CHARACTERISTICS AND SURFACE DEFLECTION BY USING VIRTUAL JOINING PROPERTIES
J. M. LEE, Y. B. LIM, N. KIM, C. S. OH
Int J Automot Technol. 2015;16(6):967-976.    DOI: https://doi.org/10.1007/s12239-015-0099-x
         Cited By 1
 Automobile Electronics
977 FAULT TOLERANT CONTROL METHOD OF DUAL STEERING ACTUATOR MOTORS FOR STEER-BY-WIRE SYSTEM
L. HE, G. Y. CHEN, H. Y. ZHENG
Int J Automot Technol. 2015;16(6):977-987.    DOI: https://doi.org/10.1007/s12239-015-0100-8
         Cited By 13
 Intelligent Vehicle / Transportation Systems
989 IMPROVED COOPERATIVE COLLISION AVOIDANCE (CCA) MODEL CONSIDERING DRIVER COMFORT
P. W. WANG, L. WANG, Y. H. LI, W. W. GUO
Int J Automot Technol. 2015;16(6):989-996.    DOI: https://doi.org/10.1007/s12239-015-0101-7
         Cited By 9
 Fuel Cell, Hybrid and Electrical Vehicle
997 DESIGN OF A VERY LIGHT L7E ELECTRIC VEHICLE PROTOTYPE
E. TANIK, V. PARLAKTAŞ
Int J Automot Technol. 2015;16(6):997-1005.    DOI: https://doi.org/10.1007/s12239-015-0102-6
         Cited By 10
 Fuel Cell, Hybrid and Electrical Vehicle
1007 TWO-LAYER DISTRIBUTED EQUALIZATION MANAGEMENT SYSTEM FOR ELECTRIC VEHICLE POWER BATTERY
J. Y. CUI, X. W. ZHANG
Int J Automot Technol. 2015;16(6):1007-1016.    DOI: https://doi.org/10.1007/s12239-015-0103-5
         Cited By 1
 Fuel Cell, Hybrid and Electrical Vehicle
1017 OPERATIONAL EFFICIENCY COMPARISON ON ECO-FRIENDLY VEHICLES INCLUDING DYNAMIC WIRELESS CHARGING
K. YI, J. KIM, K. HWANG, M. LEE, K. KIM, H. KIM, I. S. SUH
Int J Automot Technol. 2015;16(6):1017-1030.    DOI: https://doi.org/10.1007/s12239-015-0104-4
         Cited By 5
 Fuel Cell, Hybrid and Electrical Vehicle
1031 HARDWARE-IN-THE-LOOP SIMULATION TO EVALUATE THE DRIVE PERFORMANCE OF THE ELECTRIC TWO-WHEELERS ON A MOTOR DYNAMOMETER
D. K. KANG, M. S. KIM
Int J Automot Technol. 2015;16(6):1031-1040.    DOI: https://doi.org/10.1007/s12239-015-0105-3
         Cited By 7
 Other Fields of Automotive Engineering
1041 MODELING ENGINE FUEL CONSUMPTION AND NOx WITH RBF NEURAL NETWORK AND MOPSO ALGORITHM
J. D. MARTÍNEZ-MORALES, E. R. PALACIOS-HERNÁNDEZ, G. A. VELÁZQUEZ-CARRILLO
Int J Automot Technol. 2015;16(6):1041-1049.    DOI: https://doi.org/10.1007/s12239-015-0106-2
         Cited By 11
 Other Fields of Automotive Engineering
1051 DEVELOPMENT OF A FORWARD VISIBILITY ASSESSMENT TOOL BASED ON VISIBILITY ANGLE
S. Y. AHN, Y. W. JEON, J. M. YUN, P. KANG, J. H. KO, P. PARK
Int J Automot Technol. 2015;16(6):1051-1055.    DOI: https://doi.org/10.1007/s12239-015-0107-1
         Cited By 4
 Other Fields of Automotive Engineering
1057 CORRELATION BETWEEN RESIDUAL SPEEDOMETER NEEDLE READING AND IMPACT SPEED OF VEHICLES IN TRAFFIC ACCIDENTS
Q. YUAN, Y. LI, S. XING, Y. LV
Int J Automot Technol. 2015;16(6):1057-1063.    DOI: https://doi.org/10.1007/s12239-015-0108-0
         Cited By 7
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next