Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Previous issue > Previous issue



Table of Contents | March, 2014  Vol. 15 No. 2 Previous Issue | Next Issue | Archive
Articles
 Engine, Emission Technology
175 EXAMINATION OF NANOPARTICLES FROM GASOLINE DIRECT-INJECTION (GDI) ENGINES USING TRANSMISSION ELECTRON MICROSCOPY (TEM)
H. SEONG, S. CHOI, K. LEE
Int J Automot Technol. 2014;15(2):175-181.    DOI: https://doi.org/10.1007/s12239-014-0019-5
         Cited By 34
 Engine, Emission Technology
183 EXPERIMENTAL INVESTIGATION OF B20 COMBUSTION AND EMISSIONS UNDER VARIOUS INTAKE CONDITIONS FOR LOW-TEMPERATURE COMBUSTION
J. KIM, J. JANG, K. LEE, Y. LEE, S. LEE, S. OH
Int J Automot Technol. 2014;15(2):183-189.    DOI: https://doi.org/10.1007/s12239-014-0020-z
         Cited By 8
 Engine, Emission Technology
191 DESIGN OF A COMPRESSOR-POWER-BASED EXHAUST MANIFOLD PRESSURE ESTIMATOR FOR DIESEL ENGINE AIR MANAGEMENT
H. JIN, S. CHOI, S. KIM
Int J Automot Technol. 2014;15(2):191-201.    DOI: https://doi.org/10.1007/s12239-014-0021-y
         Cited By 8
 Engine, Emission Technology
203 REVIEW ON CHARACTERIZATION OF NANO-PARTICLE EMISSIONS AND PM MORPHOLOGY FROM INTERNAL COMBUSTION ENGINES: PART 1
C. L. MYUNG, A. KO, S. PARK
Int J Automot Technol. 2014;15(2):203-218.    DOI: https://doi.org/10.1007/s12239-014-0022-x
         Cited By 57
 Engine, Emission Technology
219 REVIEW ON CHARACTERIZATION OF NANO-PARTICLE EMISSIONS AND PM MORPHOLOGY FROM INTERNAL COMBUSTION ENGINES: PART 2
S. CHOI, C. L. MYUNG, S. PARK
Int J Automot Technol. 2014;15(2):219-227.    DOI: https://doi.org/10.1007/s12239-014-0023-9
         Cited By 44
 Engine, Emission Technology
229 FREE PISTON ENGINE GENERATOR: TECHNOLOGY REVIEW AND AN EXPERIMENTAL EVALUATION WITH HYDROGEN FUEL
Y. WOO, Y. J. LEE
Int J Automot Technol. 2014;15(2):229-235.    DOI: https://doi.org/10.1007/s12239-014-0024-8
         Cited By 29
 Automobile Chassis & Vehicle Dynamic
237 DYNAMIC FAILURE CHARACTERIZATION OF LASER WELDS UNDER COMBINED LOADING CONDITIONS
J. HA, H. HUH
Int J Automot Technol. 2014;15(2):237-252.    DOI: https://doi.org/10.1007/s12239-014-0025-7
         Cited By 1
 Automobile Chassis & Vehicle Dynamic
253 CO-OPERATIVE CONTROL FOR REGENERATIVE BRAKING AND FRICTION BRAKING TO INCREASE ENERGY RECOVERY WITHOUT WHEEL LOCK
J. W. KO, S. Y. KO, I. S. KIM, D. Y. HYUN, H. S. KIM
Int J Automot Technol. 2014;15(2):253-262.    DOI: https://doi.org/10.1007/s12239-014-0026-6
         Cited By 50
 Automobile Chassis & Vehicle Dynamic
263 DEVELOPMENT OF A MODEL OF THE DUAL CLUTCH TRANSMISSION IN AUTONOMIE AND VALIDATION WITH DYNAMOMETER TEST DATA
NAMDOO KIM, H. LOHSE-BUSCH, A. ROUSSEAU
Int J Automot Technol. 2014;15(2):263-271.    DOI: https://doi.org/10.1007/s12239-014-0027-5
         Cited By 12
 Automobile Chassis & Vehicle Dynamic
273 OBJECTIVE EVALUATION OF HUMAN PERCEPTION OF AUTOMOTIVE SOUND BASED ON PHYSIOLOGICAL SIGNAL OF HUMAN BRAIN
S. M. LEE, S. K. LEE
Int J Automot Technol. 2014;15(2):273-282.    DOI: https://doi.org/10.1007/s12239-014-0028-4
         Cited By 14
 Automobile Chassis & Vehicle Dynamic
283 IMPACT OF HILLY ROAD INFORMATION ON FUEL ECONOMY OF FCHEV BASED ON PARAMETERIZATION OF HILLY ROADS
J. HAN, D. KUM, Y. PARK
Int J Automot Technol. 2014;15(2):283-290.    DOI: https://doi.org/10.1007/s12239-014-0029-3
         Cited By 10
 Automobile Body and Safety
291 INNOVATIVE DESIGN OPTIMIZATION STRATEGY FOR THE AUTOMOTIVE INDUSTRY
M. S. KIM, D. O. KANG, S. J. HEO
Int J Automot Technol. 2014;15(2):291-301.    DOI: https://doi.org/10.1007/s12239-014-0030-x
         Cited By 19
 Materials and Recycling, Manufacturing
303 IN-SITU MEASUREMENT OF LOADING STRESSES WITH X-RAY DIFFRACTION FOR YIELD LOCUS DETERMINATION
A. GÜNER, B. ZILLMANN, T. LAMPKE, A. E. TEKKAYA
Int J Automot Technol. 2014;15(2):303-316.    DOI: https://doi.org/10.1007/s12239-014-0031-9
         Cited By 8
 Materials and Recycling, Manufacturing
317 FATIGUE LIFE PREDICTION OF A RUBBER MATERIAL BASED ON DYNAMIC CRACK GROWTH CONSIDERING SHEAR EFFECT
H. J. KIM, M. W. SONG, H. I. MOON, H. KIM, H. Y. KIM
Int J Automot Technol. 2014;15(2):317-324.    DOI: https://doi.org/10.1007/s12239-014-0032-8
         Cited By 6
 Automobile Electronics
325 APPROACH TO FUNCTIONAL SAFETY-COMPLIANT ECU DESIGN FOR ELECTRO-MECHANICAL BRAKE SYSTEMS
K. J. LEE, Y. H. KI, J. S. CHEON, G. HWANG, H. S. AHN
Int J Automot Technol. 2014;15(2):325-332.    DOI: https://doi.org/10.1007/s12239-014-0033-7
         Cited By 11
 Intelligent Vehicle / Transportation Systems
333 IN-VEHICLE TECHNOLOGY FOR SELF-DRIVING CARS: ADVANTAGES AND CHALLENGES FOR AGING DRIVERS
J. YANG, J. F. COUGHLIN
Int J Automot Technol. 2014;15(2):333-340.    DOI: https://doi.org/10.1007/s12239-014-0034-6
         Cited By 75
 Intelligent Vehicle / Transportation Systems
341 DEVELOPMENT OF AN AUTONOMOUS BRAKING SYSTEM USING THE PREDICTED STOPPING DISTANCE
D. H. LEE, S. K. KIM, C. S. KIM, K. S. HUH
Int J Automot Technol. 2014;15(2):341-346.    DOI: https://doi.org/10.1007/s12239-014-0035-5
         Cited By 17
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next