|
|
|
Engine, Emission Technology |
|
767 |
ACTIVE COOLANT CONTROL STRATEGIES IN AUTOMOTIVE ENGINES
K. B. KIM, K. W. CHOI, K. H. LEE, K. S. LEE
Int J Automot Technol. 2010;11(6):767-772. DOI: https://doi.org/10.1007/s12239-010-0091-4
 
|
Cited By 58 |
|
|
|
|
|
Engine, Emission Technology |
|
773 |
DEVELOPMENT OF AN ON-LINE MODEL TO PREDICT THE INCYLINDER RESIDUAL GAS FRACTION BY USING THE MEASURED INTAKE/EXHAUST AND CYLINDER PRESSURES
S. CHOI, M. KI, K. MIN
Int J Automot Technol. 2010;11(6):773-781. DOI: https://doi.org/10.1007/s12239-010-0092-3
|
|
Cited By 16 |
|
|
|
|
|
Engine, Emission Technology |
|
783 |
EFFECT OF THE NUMBER OF FUEL INJECTOR HOLES ON CHARACTERISTICS OF COMBUSTION AND EMISSIONS IN A DIESEL ENGINE
B. H. LEE, J. H. SONG, Y. J. CHANG, C. H. JEON
Int J Automot Technol. 2010;11(6):783-791. DOI: https://doi.org/10.1007/s12239-010-0093-2
|
|
Cited By 32 |
|
|
|
|
|
Engine, Emission Technology |
|
793 |
EFFECT OF VARIOUS LPG SUPPLY SYSTEMS ON EXHAUST PARTICLE EMISSION IN SPARK-IGNITED COMBUSTION ENGINE
Jin Wook Lee, H. S. DO, S. I. KWEON, K. K. PARK, J. H. HONG
Int J Automot Technol. 2010;11(6):793-800. DOI: https://doi.org/10.1007/s12239-010-0094-1
|
|
Cited By 19 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
801 |
NEW DESIGN OF A ROAD PROFILER
M. DEMIĆ, D. DILIGENSKI, M. DEMIĆ, I. DEMIĆ
Int J Automot Technol. 2010;11(6):801-808. DOI: https://doi.org/10.1007/s12239-010-0095-0
|
|
Cited By 3 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
809 |
DEVELOPMENT OF A NEW SOUND METRIC FOR IMPACT SOUND IN A PASSENGER CAR USING THE WAVELET TRANSFORM
S. W. PARK, S. K. LEE
Int J Automot Technol. 2010;11(6):809-818. DOI: https://doi.org/10.1007/s12239-010-0096-z
|
|
Cited By 5 |
|
|
|
|
|
Automobile Body and Safety |
|
819 |
OPTIMUM SUV BUMPER SYSTEM DESIGN CONSIDERING PEDESTRIAN PERFORMANCE
D. K. PARK, C. D. JANG
Int J Automot Technol. 2010;11(6):819-824. DOI: https://doi.org/10.1007/s12239-010-0097-y
|
|
Cited By 10 |
|
|
|
|
|
Automobile Body and Safety |
|
825 |
CRASH PROTECTION OF HYBRID ELECTRICAL VEHICLES FOR AMENDING THE KMVSS NO. 91
J. M. LIM, G. H. KIM
Int J Automot Technol. 2010;11(6):825-830. DOI: https://doi.org/10.1007/s12239-010-0098-x
|
|
Cited By 2 |
|
|
|
|
|
Automobile Body and Safety |
|
831 |
BONNET WEIGHT REDUCTION AND VRU PROTECTION: DESIGN PROPOSALS IMPLEMENTING NON-CONVENTIONAL MATERIALS
G. BELINGARDI, G. CHIANDUSSI, E. GOBETTO, A. SCATTINA
Int J Automot Technol. 2010;11(6):831-842. DOI: https://doi.org/10.1007/s12239-010-0099-9
|
|
Cited By 14 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
843 |
EFFECT OF MINOR ELEMENTS ON THE CREEP RESISTANCE OF Mg-Zn-Mn-(Ca) ALLOY
D. M. KANG, J. O. AN, J. S. KWAK
Int J Automot Technol. 2010;11(6):843-847. DOI: https://doi.org/10.1007/s12239-010-0100-7
|
|
Cited By 4 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
849 |
PROCESSING AND FIBER CONTENT EFFECTS ON THE MACHINABILITY OF COMPRESSION MOULDED RANDOM DIRECTION SHORT GFRP COMPOSITES
D. KIM, Y. H. KIM, S. GURURAJA, M. RAMULU
Int J Automot Technol. 2010;11(6):849-855. DOI: https://doi.org/10.1007/s12239-010-0101-6
|
|
Cited By 9 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
857 |
EFFECTS OF RESIDUAL STRESSES ON THE STATIC AND FATIGUE STRENGTH OF LASER-WELDED LAP JOINTS WITH DIFFERENT WELDING SPEEDS
R. A. SINDHU, M. K. PARK, S. J. LEE, K. D. LEE
Int J Automot Technol. 2010;11(6):857-863. DOI: https://doi.org/10.1007/s12239-010-0102-5
|
|
Cited By 11 |
|
|
|
|
|
Automobile Electronics |
|
865 |
ANALYSIS OF AN AUTOMOTIVE GROUND SYSTEM BASED ON ITS STEADY-STATE MODEL
H. LIM, D. LEE, S. S. OK, J. H. PARK
Int J Automot Technol. 2010;11(6):865-871. DOI: https://doi.org/10.1007/s12239-010-0103-4
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
873 |
RELIABILITY AND SAFETY ANALYSIS METHODOLOGY FOR IDENTIFICATION OF DRIVERS’ ERRONEOUS ACTIONS
W. H. WHANG, Q. CAO, K. KIKEUCHI, H. BUBB
Int J Automot Technol. 2010;11(6):873-881. DOI: https://doi.org/10.1007/s12239-010-0104-3
|
|
Cited By 30 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
883 |
IN AND OUT VISION-BASED DRIVER-INTERACTIVE ASSISTANCE SYSTEM
H. C. CHOI, S. Y. KIM, S. Y. OH
Int J Automot Technol. 2010;11(6):883-892. DOI: https://doi.org/10.1007/s12239-010-0105-2
|
|
Cited By 2 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
893 |
PERFORMANCE CHARACTERISTICS OF A SUPPLEMENTARY STACKCOOLING SYSTEM FOR FUEL-CELL VEHICLES USING A CARBON DIOXIDE AIR-CONDITIONING UNIT
S. C. KIM, J. C. PARK, M. S. KIM
Int J Automot Technol. 2010;11(6):893-900. DOI: https://doi.org/10.1007/s12239-010-0106-1
|
|
Cited By 9 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
901 |
HYDROPLANING SIMULATIONS FOR TIRES USING FEM, FVM AND AN ASYMPTOTIC METHOD
T. -W. KIM, H. -Y. JEONG
Int J Automot Technol. 2010;11(6):901-908. DOI: https://doi.org/10.1007/s12239-010-0107-0
|
|
Cited By 12 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
909 |
DISCOMFORT OF VERTICAL WHOLE-BODY SHOCK-TYPE VIBRATION IN THE FREQUENCY RANGE OF 0.5 TO 16 HZ
S. J. AHN
Int J Automot Technol. 2010;11(6):909-916. DOI: https://doi.org/10.1007/s12239-010-0108-z
|
|
Cited By 15 |
|
|
|
|
> Previous issue
