Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img open_access
Previous issue > Previous issue



Table of Contents | October, 2023  Vol. 24 No. 5 Previous Issue | Next Issue | Archive
Articles
 Engine and Emissions, Fuels and Lubricants
1241 OPTICAL STUDY ON SPRAY AND TWO-STAGE IGNITION CHARACTERISTICS FOR DIESEL SPRAY UNDER LOW AMBIENT TEMPERATURE AND DENSITY CONDITIONS
Yikai Li , Zefeng Xue , Zhongjie Shi , Haiyan Chen , Weiwei Lv
Int J Automot Technol. 2023;24(5):1241-1257.    DOI: https://doi.org/10.1007/s12239-023-0101-y
         Cited By 1
 Chassis, Connected Automated Vehicles and ITS, Electrical and Electronics, Vehicle Dynamics and Control
1259 OPTIMAL PATH PLANNING FOR AUTONOMOUS VEHICLES USING ARTIFICIAL POTENTIAL FIELD ALGORITHM
Giseo Park , Mooryong Choi
Int J Automot Technol. 2023;24(5):1259-1267.    DOI: https://doi.org/10.1007/s12239-023-0102-x
         Cited By 1
 Body and Safety, Chassis, Heat Transfer, Fluid and Thermal Engineering, Manufacturing, Noise, Vibration and Harshness, Transmission and Driveline, Vehicle Dynamics and Control
1269 NOVEL COLLABORATIVE DESIGN METHOD FOR LIGHTWEIGHT OPTIMIZATION DESIGN OF VEHICLE LOAD-BEARING PARTS
Dashuang Zhou , Zhengyang Kang , Xiaoping Su
Int J Automot Technol. 2023;24(5):1269-1284.    DOI: https://doi.org/10.1007/s12239-023-0103-9
      
 Body and Safety, Manufacturing, Materials and Recycling
1285 IN-PLANE DYNAMICS CHARACTERISTICS AND MULTI-OBJECTIVE OPTIMIZATION OF NEGATIVE POISSON’S RATIO HONEYCOMB STRUCTURE WITH POWER FUNCTION CURVE
Yifan Zhu , Fengxiang Xu , Yijie Guan , Zhen Zou , Libin Duan , Zhanpeng Du , Hongfeng Ma
Int J Automot Technol. 2023;24(5):1285-1303.    DOI: https://doi.org/10.1007/s12239-023-0104-8
      
 Body and Safety, Manufacturing, Materials and Recycling
1305 SAFETY EVALUATION FOR AUTOMATED VEHICLES IN INTERSECTION CROSSING
Seon Woo Kim , Dae Hwan Kim , Do Hyun Kim , Myung Yeon Park , Jayil Jeong
Int J Automot Technol. 2023;24(5):1305-1312.    DOI: https://doi.org/10.1007/s12239-023-0105-7
      
 Chassis, Connected Automated Vehicles and ITS, Electrical and Electronics, Vehicle Dynamics and Control
1313 NOVEL PAYLOAD PARAMETER SENSITIVITY ANALYSIS ON OBSERVATION ACCURACY OF LIGHTWEIGHT ELECTRIC VEHICLES
Xianjian Jin , Zhaoran Wang , Junpeng Yang , Liwei Xu , Guodong Yin
Int J Automot Technol. 2023;24(5):1313-1324.    DOI: https://doi.org/10.1007/s12239-023-0106-6
         Cited By 2
 Body and Safety, Noise, Vibration and Harshness
1325 EQUIVALENT STIFFNESS MODELING METHOD OF A BATTERY SYSTEM FOR EVALUATING VEHICLE REAR-END COLLISION PERFORMANCE
Jaejun Lee , Heung-Kyu Kim , Seung-Jin Heo , Sang-Jin Lee
Int J Automot Technol. 2023;24(5):1325-1333.    DOI: https://doi.org/10.1007/s12239-023-0107-5
      
 Chassis, Electrical and Electronics, Vehicle Dynamics and Control
1335 CENTER OF GRAVITY POSITION ESTIMATION OF COUNTERBALANCED FORKLIFT TRUCK BASED ON MULTI MODEL DATA FUSION
Guang Xia , Chenhao Zhang , Xiwen Tang , Yang Zhang , Linfeng Zhao
Int J Automot Technol. 2023;24(5):1335-1347.    DOI: https://doi.org/10.1007/s12239-023-0108-4
      
 Engine and Emissions, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering
1349 IMPLEMENTATION OF A NON-SURFACTANT WATER-IN-DIESEL EMULSION FUEL IN A COMMON RAIL DIRECT INJECTION DIESEL VEHICLE
Hasbullah Abdul Rahman , Md. Mujibur Rahman , Wira Jazair Yahya , Tamanna E Kaonain , Hasannuddin Abd Kadir , Mohamad Qayyum Mohd Tamam , Ahmad Muhsin Ithnin , Fauzan Ahmad , Mohd Fareez Edzuan Abdullah , Hirofumi Noge , Chungpyo Hong , Takeshi Otaka , Eiji Kinoshita
Int J Automot Technol. 2023;24(5):1349-1358.    DOI: https://doi.org/10.1007/s12239-023-0109-3
      
 Electric, Fuel Cell, and Hybrid Vehicle
1359 OPTIMAL ENERGY DISTRIBUTION OF MULTI-ENERGY SOURCES IN FUEL-CELL ELECTRIC BUS USING LONG SHORT-TERM MEMORY
Giyeon Hwang , Seunghyup Shin , Sangyul Lee , Minjae Kim
Int J Automot Technol. 2023;24(5):1359-1367.    DOI: https://doi.org/10.1007/s12239-023-0110-x
      
 Engine and Emissions, Fuels and Lubricants
1369 AXIAL HOLE AIR-ENTRAINING COOLING TECHNIQUE OF RADIAL-FLOW TURBINES
Chao Ma , Jianjian Zhang , Ningning Wang , Zhifu Zhu
Int J Automot Technol. 2023;24(5):1369-1381.    DOI: https://doi.org/10.1007/s12239-023-0111-9
      
 Engine and Emissions, Fuels and Lubricants
1383 INFLUENCE OF INJECTION SYSTEM PARAMETERS ON COMBUSTION NOISE OF A SMALL POWER NON-ROAD DIESEL ENGINE
Xinfeng Zhou , Zhihao Ma , Yuna Liu , Ao Li
Int J Automot Technol. 2023;24(5):1383-1393.    DOI: https://doi.org/10.1007/s12239-023-0112-8
         Cited By 1
 Electric, Fuel Cell, and Hybrid Vehicle, Engine and Emissions, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering
1395 KNOCK ONSET DETERMINATION WITH 1D CNN USING RANDOM SEARCH HYPERPARAMETER OPTIMIZATION AND DATA AUGMENTATION IN SI ENGINE
Jihwan Park , Seunghyup Shin , Sechul Oh , Sangyul Lee , Woojae Shin , Kyoungdoug Min
Int J Automot Technol. 2023;24(5):1395-1410.    DOI: https://doi.org/10.1007/s12239-023-0113-7
      
 Electric, Fuel Cell, and Hybrid Vehicle
1411 INFLUENCE FACTORS OF THE V2G ECONOMIC BENEFITS OF PURE ELECTRIC LOGISTICS VEHICLES: A CASE STUDY IN CHENGDU
Hao Zhang , Yu Liu , Jingyuan Li , Hanzhengnan Yu , Hang Xu , Kunqi Ma , Yongkai Liang , Xiaopan An , Xi Hu
Int J Automot Technol. 2023;24(5):1411-1422.    DOI: https://doi.org/10.1007/s12239-023-0114-6
      
 Engine and Emissions, Fuels and Lubricants
1423 EFFECT OF ACTIVE ECO-MODE ON REDUCTION OF ON-ROAD CO2 EMISSIONS IN LIGHT-DUTY GASOLINE VEHICLE
Seungil Lee , Yongjoo Lee , Joohan Kim , Namho Kim , Cha-Lee Myung , Hoimyung Choi , Kyoungdoug Min
Int J Automot Technol. 2023;24(5):1423-1439.    DOI: https://doi.org/10.1007/s12239-023-0115-5
      
 Body and Safety, Chassis, Human Factors and Ergonomics, Materials and Recycling, Noise, Vibration and Harshness, Transmission and Driveline, Vehicle Dynamics and Control
1441 DEVELOPMENT OF A MULTIBODY MODEL USED TO STUDY THE IMPACT BETWEEN A VEHICLE WHEEL WITH A POTHOLE
Alexandru Ionut Radu , Adrian Bogdan Tolea , Daniel Dragos Trusca , Nicolae Ispas , Mircea Nastasoiu
Int J Automot Technol. 2023;24(5):1441-1446.    DOI: https://doi.org/10.1007/s12239-023-0116-4
      
 Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline
1447 NUMERICAL STUDY ON THE EFFECTS OF ENVIRONMENTAL TEMPERATURE OF MAJOR CITIES IN CALIFORNIA ON THE CAPACITY FADE OF BATTERY CELLS IN ELECTRIC VEHICLES
Saekyeol Kim , Taek Keun Lyu , Jae Wan Park
Int J Automot Technol. 2023;24(5):1447-1458.    DOI: https://doi.org/10.1007/s12239-023-0117-3
         Cited By 1
 Connected Automated Vehicles and ITS, Electric, Fuel Cell, and Hybrid Vehicle, Noise, Vibration and Harshness, Transmission and Driveline, Vehicle Dynamics and Control
1459 EFFECT OF TIRE INFLATION PRESSURE AND WHEEL FRONT TOE ANGLE ON FUEL CONSUMPTION OF A LIGHT-DUTY VEHICLE
Riton Kumer Das , Md. Abu Mowazzem Hossain , Md. Tazul Islam , Sajal Chandra Banik
Int J Automot Technol. 2023;24(5):1459-1473.    DOI: https://doi.org/10.1007/s12239-023-0118-2
      
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next