Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Previous issue > Previous issue



Table of Contents | June, 2019  Vol. 20   No.3 Previous Issue | Next Issue | Archive
Articles
 Fuel Cell, Hybrid Vehicle
429 PERFORMANCE ESTIMATION OF NEW VEHICLE THERMAL MANAGEMENT SYSTEM FOR AN UNMANNED MILITARY GROUND VEHICLE USING INTEGRATED SIMULATION MODEL
Tae Woo Kim, Min Yeol Ryu, Sung Soo Park, Keun Hyong Kim, Hee Young Kim, Sung Jin Park
Int J Automot Technol. 2019;20(3):429-444.    DOI: https://doi.org/10.1007/s12239-019-0041-8
      
 Body and Safety
445 FINITE ELEMENT MODEL OF A HIGH-STATURE MALE PEDESTRIAN FOR SIMULATING CAR-TO-PEDESTRIAN COLLISIONS
Wansoo Pak, Yunzhu Meng, Jeremy Schap, Bharath Koya, Scott F. Gayzik, Costin D. Untaroiu
Int J Automot Technol. 2019;20(3):445-453.    DOI: https://doi.org/10.1007/s12239-019-0042-7
      
 Intelligent Vehicle/Transportation Systems
455 MODELLING THE INTRUSIVE FEELINGS OF ADVANCED DRIVER ASSISTANCE SYSTEMS BASED ON VEHICLE ACTIVITY LOG DATA: CASE STUDY FOR THE LANE KEEPING ASSISTANCE SYSTEM
Kyudong Park, Jiyoung Kwahk, Sung H. Han, Minseok Song, Dong Gu Choi, Hyeji Jang, Dohyeon Kim, Young Deok Won, In Sub Jeong
Int J Automot Technol. 2019;20(3):455-463.    DOI: https://doi.org/10.1007/s12239-019-0043-6
      
 Engine and Emissions, Fuels and Lubricants
465 NUMERICAL INVESTIGATION ON OIL PAN DESIGN PARAMETERS TO IMPROVE ENGINE PERFORMANCE DURING OIL COOL DOWN AND WARM UP PERIODS
Yusuf Kartal, Ovun Isin
Int J Automot Technol. 2019;20(3):465-475.    DOI: https://doi.org/10.1007/s12239-019-0044-5
      
 Chassis, Electrical and Electronics
477 DUAL-MOTOR FULL-WEIGHT ELECTRIC POWER STEERING SYSTEM FOR COMMERCIAL VEHICLE
Yaohua Li, Qianlong Feng, Yangsen Zhang, Youfei Nan
Int J Automot Technol. 2019;20(3):477-486.    DOI: https://doi.org/10.1007/s12239-019-0045-4
      
 Electrical and Electronics
487 PREDICTION OF CONDUCTED EMISSION IN A PMSM-DRIVE BRAKING SYSTEM USING A CIRCUIT MODEL COMBINED WITH EM SIMULATION
Junesang Lee, Jungrae Ha, Minho Kim, Sangwon Yun, Yeongsik Kim, Wansoo Nah
Int J Automot Technol. 2019;20(3):487-498.    DOI: https://doi.org/10.1007/s12239-019-0046-3
      
 Heat Transfer, Fluid and Thermal Engineering
499 DEVELOPMENT OF A FLOW NETWORK SIMULATION PROGRAM PART III – COMPRESSIBLE FLOW ANALYSIS
Junghwan Lim, Kiyoung Yang
Int J Automot Technol. 2019;20(3):499-506.    DOI: https://doi.org/10.1007/s12239-019-0047-2
      
 Vehicle Dynamics and Control
507 PATH GENERATION ALGORITHM BASED ON CRASH POINT PREDICTION FOR LANE CHANGING OF AUTONOMOUS VEHICLES
Chanho Park, Nak-Tak Jeong, Dongyeon Yu, Sung-Ho Hwang
Int J Automot Technol. 2019;20(3):507-519.    DOI: https://doi.org/10.1007/s12239-019-0048-1
      
 Fuel Cell, Hybrid Vehicle
521 DYNAMIC MODELING OF BRAKE IN POWER-SPLIT DHT AND PRESSURE TRACKING CONTROL WITH SLIDING MODE VARIABLE STRUCTURE METHOD
Zhiguo Zhao, Mengna Li, Chen Wang, Lanxing Jiang, Maoyao Wang
Int J Automot Technol. 2019;20(3):521-530.    DOI: https://doi.org/10.1007/s12239-019-0049-0
      
 Electric, Fuel Cell, and Hybrid Vehicle, Engine and Emissions
531 FUEL ECONOMY IMPROVEMENT ANALYSIS OF HYBRID ELECTRIC VEHICLE
InChun Chung, Hyehyun Kang, Jinil Park, Jonghwa Lee
Int J Automot Technol. 2019;20(3):531-537.    DOI: https://doi.org/10.1007/s12239-019-0050-7
      
 Engine, Emission Technology
539 COMBUSTION SYSTEM DESIGN OF A GENSET DIESEL ENGINE BY USING DFSS METHODOLOGY
Tae Joong Wang, Seung Kwon Hwang
Int J Automot Technol. 2019;20(3):539-547.    DOI: https://doi.org/10.1007/s12239-019-0051-6
      
 Body and Safety
549 RESEARCH ON THE CRASHWORTHINESS OF REGULAR CENTURION 2M BARRIER BASED ON THE ARBITRARY LAGRANGE-EULER METHOD
Dongwei Yuan, Yiping Luo, Yong Peng
Int J Automot Technol. 2019;20(3):549-558.    DOI: https://doi.org/10.1007/s12239-019-0052-5
      
 
559 THEORETICAL ANALYSIS ON BENDING COLLAPSE OF REINFORCED THIN-WALLED HAT-SHAPED SECTION BEAMS
Guang Chen, Chao Chen
Int J Automot Technol. 2019;20(3):559-568.    DOI: https://doi.org/10.1007/s12239-019-0053-4
      
 Alternative Energy & Vehicle
569 COMBUSTION CHARACTERISTICS OF HYDROTREATED VEGETABLE OIL-DIESEL BLENDS UNDER EGR AND LOW TEMPERATURE COMBUSTION CONDITIONS
Sombat Marasri, Pop-Paul Ewphun, Prathan Srichai, Chinda Charoenphonphanich, Preechar Karin, Manida Tongroon, Hidenori Kosaka
Int J Automot Technol. 2019;20(3):569-578.    DOI: https://doi.org/10.1007/s12239-019-0054-3
      
 Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering
579 EFFECTS OF AN EXHAUST HEAT RECOVERY SYSTEM ON PERFORMANCE CHARACTERISTICS OF A FORKLIFT TRUCK
Man-Woong Heo, Suk-Jung Bae, Joo-Yeong Jeong, Han-Sung Yoo, Seung-Uk Park, Hyung-Seok Heo
Int J Automot Technol. 2019;20(3):579-588.    DOI: https://doi.org/10.1007/s12239-019-0055-2
      
 Chassis, Vehicle Dynamics and Control
589 ACTIVE FRONT STEERING FOR DRIVER’S STEERING COMFORT AND VEHICLE DRIVING STABILITY
Jeongmin Cho, Kunsoo Huh
Int J Automot Technol. 2019;20(3):589-596.    DOI: https://doi.org/10.1007/s12239-019-0056-1
      
 Fuels and Lubricants
597 DEVELOPMENT OF DRIVER FUEL ECONOMY INDEX FOR REAL ROAD FUEL ECONOMY
Taehun Ha, Seonwoo Choi, Yoonwoo Lee, Hoimyung Choi
Int J Automot Technol. 2019;20(3):597-605.    DOI: https://doi.org/10.1007/s12239-019-0057-0
      
 Engine and Emissions, Fuels and Lubricants
607 GASEOUS EMISSIONS AND PARTICLE MICROSTRUCTURE CHARACTERISTICS OF PODE/DIESEL BLEND FUEL
Wanying Gao, Junheng Liu, Ping Sun, Chen Yang, Jia Fang
Int J Automot Technol. 2019;20(3):607-617.    DOI: https://doi.org/10.1007/s12239-019-0058-z
      
 Engine and Emissions, Transmission and Driveline
619 ENGINE NET TORQUE COMPENSATION THROUGH DRIVELINE TORQUE ESTIMATION IN A PARALLEL HYBRID VEHICLE
Jinrak Park, Seibum Choi, Jiwon Oh, Jeongsoo Eo
Int J Automot Technol. 2019;20(3):619-627.    DOI: https://doi.org/10.1007/s12239-019-0059-y
      
 Heat Transfer, Fluid and Thermal Engineering
629 NUMERICAL MODELING FOR N-HEPTANE SPRAY COMBUSTION PROCESSES WITH VARIOUS AMBIENT OXYGEN CONCENTRATIONS
Kiyoung Jung, Minjun Kwon, Sewon Kim, Sungwook Park, Yongmo Kim
Int J Automot Technol. 2019;20(3):629-638.    DOI: https://doi.org/10.1007/s12239-019-0060-5
      
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: car@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers. All rights reserved.                
Close layer
prev next