|
|
|
Engine and Emissions |
|
941 |
EFFECT OF HYDROTHERMAL AGING OVER A COMMERCIAL DOC
ON NO2 PRODUCTION AND SUBSEQUENT SCR EFFICIENCY
Tae Joong Wang
Int J Automot Technol. 2018;19(6):941-947. DOI: https://doi.org/10.1007/s12239-018-0091-3
 
|
Cited By 3 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
949 |
AERODYNAMIC DESIGN OF A SOLAR ROAD VEHICLE
Ljubomir Majdandžić, Dalibor Buljić, Andrija Buljac, Hrvoje Kozmar
Int J Automot Technol. 2018;19(6):949-957. DOI: https://doi.org/10.1007/s12239-018-0092-2
|
|
Cited By 3 |
|
|
|
|
|
Chassis |
|
959 |
DC MOTOR CURRENT CONTROL ALGORITHM USING
PROPORTIONAL-INTEGRAL LQT WITH DISTURBANCE OBSERVER
Ung Jon, Jihwan Kim, Hyeongcheol Lee
Int J Automot Technol. 2018;19(6):959-967. DOI: https://doi.org/10.1007/s12239-018-0093-1
|
|
Cited By 3 |
|
|
|
|
|
Chassis |
|
969 |
FUNCTION INTEGRATION FOR LIGHTWEIGHT CHASSIS BASED ON
AXIOMATIC DESIGN AND DESIGN STRUCTURE MATRIX
Meng Wang, Elmar Beeh, Andreas Höfer, Horst Friedrich
Int J Automot Technol. 2018;19(6):969-979. DOI: https://doi.org/10.1007/s12239-018-0094-0
|
|
Cited By 3 |
|
|
|
|
|
Vehicle Dynamics and Control |
|
981 |
ACOUSTICAL CHARACTERISTICS OF THE AIR FILTER IN THE
ENGINE INTAKE AIR CLEANER
Jang-Hoon Kang, Jeong-Guon Ih
Int J Automot Technol. 2018;19(6):981-991. DOI: https://doi.org/10.1007/s12239-018-0095-z
|
|
Cited By 4 |
|
|
|
|
|
Vehicle Dynamics and Control |
|
993 |
ESTIMATION OF ROAD BANK ANGLE AND VEHICLE SIDE SLIP
ANGLE USING BAYESIAN TRACKING AND KALMAN FILTER
APPROACH
Minje Hyun, Wanki Cho
Int J Automot Technol. 2018;19(6):993-1000. DOI: https://doi.org/10.1007/s12239-018-0096-y
|
|
Cited By 7 |
|
|
|
|
|
Vehicle Dynamics and Control |
|
1001 |
DEVELOPMENT OF PREVIEW ACTIVE SUSPENSION CONTROL
SYSTEM AND PERFORMANCE LIMIT ANALYSIS BY TRAJECTORY
OPTIMIZATION
Minwoo Soh, Hyeongjun Jang, Jaehyung Park, Youngil Sohn, Kihong Park
Int J Automot Technol. 2018;19(6):1001-1012. DOI: https://doi.org/10.1007/s12239-018-0097-x
|
|
Cited By 11 |
|
|
|
|
|
Body and Safety |
|
1013 |
AUTONOMOUS EMERGENCY BRAKING CONSIDERING ROAD SLOPE
AND FRICTION COEFFICIENT
Hyunkyu Kim, Kyungsik Shin, Iljoon Chang, Kunsoo Huh
Int J Automot Technol. 2018;19(6):1013-1022. DOI: https://doi.org/10.1007/s12239-018-0098-9
|
|
Cited By 25 |
|
|
|
|
|
Body and Safety |
|
1023 |
REDUCTION IN THE HEAD INJURY LEVEL DUE TO JUNIOR HIGH
SCHOOL CYCLISTS WEARING HELMETS
Yasuhiro Matsui, Shoko Oikawa
Int J Automot Technol. 2018;19(6):1023-1032. DOI: https://doi.org/10.1007/s12239-018-0099-8
|
|
Cited By 1 |
|
|
|
|
|
Body and Safety |
|
1033 |
VARIABLE CROSS-SECTION RECTANGULAR BEAM AND SENSITIVITY
ANALYSIS FOR LIGHTWEIGHT DESIGN OF BUS FRAME
Wenjie Zuo, Jiaxin Fang, Minghui Zhong, Guikai Guo
Int J Automot Technol. 2018;19(6):1033-1040. DOI: https://doi.org/10.1007/s12239-018-0100-6
|
|
Cited By 12 |
|
|
|
|
|
Body and Safety |
|
1041 |
DESIGN FOR HEADREST INCLUDING GUIDES SLOT TO REDUCE
THE NECK FORCE IN REAR END IMPACT
YunSik Yang, YoungShin Kim, EuySik Jeon
Int J Automot Technol. 2018;19(6):1041-1048. DOI: https://doi.org/10.1007/s12239-018-0101-5
|
|
|
|
|
Fuels and Lubricants |
|
1049 |
EVALUATION AND MEASUREMENT THE RECOVERED ENERGY FROM
AUTOMOBILE SUSPENSION IN THE OPERATION CONDITIONS
Veronel-George Jacotă, Eugen-Mihai Negruş, Marius Florin Toma
Int J Automot Technol. 2018;19(6):1049-1054. DOI: https://doi.org/10.1007/s12239-018-0102-4
|
|
Cited By 2 |
|
|
|
|
|
Materials and Recycling |
|
1055 |
CREEP LIFE PREDICTION OF ALLOY 718 FOR AUTOMOTIVE
ENGINE MATERIALS
Yu Sik Kong, Jiyoung Yu, Young Whan Park
Int J Automot Technol. 2018;19(6):1055-1059. DOI: https://doi.org/10.1007/s12239-018-0103-3
|
|
Cited By 4 |
|
|
|
|
|
Electric, Fuel Cell, and Hybrid Vehicle |
|
1061 |
NEW OPTIMAL POWER MANAGEMENT STRATEGY FOR SERIES
PLUG-IN HYBRID ELECTRIC VEHICLES
Erfan Taherzadeh, Shahram Javadi, Morteza Dabbaghjamanesh
Int J Automot Technol. 2018;19(6):1061-1069. DOI: https://doi.org/10.1007/s12239-018-0104-2
|
|
Cited By 14 |
|
|
|
|
|
Electric, Fuel Cell, and Hybrid Vehicle |
|
1071 |
DISTURBANCE OBSERVER-BASED SIDESLIP ANGLE CONTROL
FOR IMPROVING CORNERING CHARACTERISTICS OF IN-WHEEL
MOTOR ELECTRIC VEHICLES
Hee Seong Kim, Young Jin Hyun, Kang Hyun Nam
Int J Automot Technol. 2018;19(6):1071-1080. DOI: https://doi.org/10.1007/s12239-018-0105-1
|
|
Cited By 8 |
|
|
|
|
|
Electric, Fuel Cell, and Hybrid Vehicle |
|
1081 |
OPTIMIZATION OF GEAR RATIO OF IN-WHEEL MOTOR VEHICLE
CONSIDERING PROBABILISTIC DRIVER MODEL
Kihan Kwon, Minsik Seo, Seungjae Min
Int J Automot Technol. 2018;19(6):1081-1089. DOI: https://doi.org/10.1007/s12239-018-0106-0
|
|
Cited By 5 |
|
|
|
|
|
Connected Automated Vehicles and ITS |
|
1091 |
ELECTRICALLY ASSISTED INTERNAL COMBUSTION ENGINES:
A COMPARATIVE ANALYSIS
Carlo Scaffidi, Salvatore De Caro, Salvatore Foti, Tommaso Scimone, Antonio Testa
Int J Automot Technol. 2018;19(6):1091-1101. DOI: https://doi.org/10.1007/s12239-018-0107-z
|
|
Cited By 7 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
1103 |
COOLING EFFICIENCY ACCORDING TO SHAPE CHANGES TO THE
STRAIGHT VENTILATION HOLE IN CARBON-CERAMIC BRAKE DISKS
Dong Guk Ko, Hamada Mohamed Abdelmotalib, Ik-Tae Im, Dong Won Im, Suck Ju Yoon
Int J Automot Technol. 2018;19(6):1103-1110. DOI: https://doi.org/10.1007/s12239-018-0108-y
|
|
|
|
> Previous issue
