|
|
|
Engine, Emission Technology |
|
1 |
3D EHD LUBRICATION AND WEAR FOR PISTON RING-CYLINDER LINER ON DIESEL ENGINES
Y. K. JIANG, J. P. ZHANG, G. HONG, L. P. WAN, X. LIU
Int J Automot Technol. 2015;16(1):1-15. DOI: https://doi.org/10.1007/s12239-015-0001-x
 
|
Cited By 21 |
|
|
|
|
|
Engine, Emission Technology |
|
17 |
DESIGN OF AN AIR-COOLED CONDENSER FOR ENGINE COOLANT WASTE HEAT RECOVERY
S. J. BAE, H. S. HEO, C. J. KIM, H. Y. LEE
Int J Automot Technol. 2015;16(1):17-26. DOI: https://doi.org/10.1007/s12239-015-0002-9
|
|
Cited By 3 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
27 |
DESIGN AND DEVELOPMENT OF A HEADING ANGLE CONTROLLER FOR AN UNMANNED GROUND VEHICLE
S. SAHOO, S. C. SUBRAMANIAN, N. MAHALE, S. SRIVASTAVA
Int J Automot Technol. 2015;16(1):27-37. DOI: https://doi.org/10.1007/s12239-015-0003-8
|
|
Cited By 12 |
|
|
|
|
|
Automobile Body and Safety |
|
39 |
FINITE ELEMENT BASED IMPROVEMENT OF A LIGHT TRUCK DESIGN TO OPTIMIZE CRASHWORTHINESS
D. Y. CHEN, L. M. WANG, C. Z. WANG, L. K. YUAN, T. Y. ZHANG, Z. Z. ZHANG
Int J Automot Technol. 2015;16(1):39-49. DOI: https://doi.org/10.1007/s12239-015-0004-7
|
|
Cited By 28 |
|
|
|
|
|
Automobile Body and Safety |
|
51 |
ASSEMBLY VARIATION MODELING METHOD RESEARCH OF COMPLIANT AUTOMOBILE BODY SHEET METAL PARTS USING THE FINITE ELEMENT METHOD
K. G. YU, Z. H. YANG
Int J Automot Technol. 2015;16(1):51-56. DOI: https://doi.org/10.1007/s12239-015-0005-6
|
|
Cited By 19 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
57 |
INFLUENCE OF PROPELLER SHAFT BENDING VIBRATION ON DRIVETRAIN GEAR DYNAMICS
J. YANG, T. C. LIM
Int J Automot Technol. 2015;16(1):57-65. DOI: https://doi.org/10.1007/s12239-015-0006-5
|
|
Cited By 10 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
67 |
LIGHT-WEIGHT DESIGN OF AUTOMOTIVE SUSPENSION LINK BASED ON DESIGN OF EXPERIMENT
J. H. PARK, K. J. KIM, J. W. LEE, J. K. YOON
Int J Automot Technol. 2015;16(1):67-71. DOI: https://doi.org/10.1007/s12239-015-0007-4
|
|
Cited By 36 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
73 |
ANISOTROPY EFFECT ON THE FRACTURE MODEL OF DP980 SHEETS CONSIDERING THE LOADING PATH
N. PARK, H. HUH, J. B. NAM, C. G. JUNG
Int J Automot Technol. 2015;16(1):73-81. DOI: https://doi.org/10.1007/s12239-015-0008-3
|
|
Cited By 22 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
83 |
FLEXIBLE ROLL FORMING PROCESS DESIGN FOR VARIABLE CROSS-SECTION PROFILE
B. D. JOO, S. W. HAN, S. G. R. SHIN, Y. H. MOON
Int J Automot Technol. 2015;16(1):83-88. DOI: https://doi.org/10.1007/s12239-015-0009-2
|
|
Cited By 12 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
89 |
LASER IRRADIATED BENDING CHARACTERISTICS OF THE ULTRA-HIGH STRENGTH STEEL SHEETS
J. H. SONG, G. A. LEE, K. H. JUNG, S. J. PARK
Int J Automot Technol. 2015;16(1):89-96. DOI: https://doi.org/10.1007/s12239-015-0010-9
|
|
Cited By 6 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
97 |
MOTOR CONTROL ALGORITHM FOR AN OPTIMAL ENGINE OPERATION OF POWER SPLIT HYBRID ELECTRIC VEHICLE
S. HONG, H. KIM, J. KIM
Int J Automot Technol. 2015;16(1):97-105. DOI: https://doi.org/10.1007/s12239-015-0011-8
|
|
Cited By 15 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
107 |
STEREO VISION ENABLING FAST ESTIMATION OF FREE SPACE ON TRAFFIC ROADS FOR AUTONOMOUS NAVIGATION
K. Y. LEE, G. Y. SONG, J. M. PARK, J. W. LEE
Int J Automot Technol. 2015;16(1):107-115. DOI: https://doi.org/10.1007/s12239-015-0012-7
|
|
Cited By 5 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
117 |
NEW MOTION CUEING ALGORITHM FOR DRIVING SIMULATOR BASED ON VARIANT HARMONIC WAVELET
X. M. GONG, X. H. LI
Int J Automot Technol. 2015;16(1):117-126. DOI: https://doi.org/10.1007/s12239-015-0013-6
|
|
Cited By 4 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
127 |
DETECTION AND ISOLATION OF FAULTS IN THE EXHAUST PATH OF TURBOCHARGED AUTOMOTIVE ENGINES
R. SALEHI, A. ALASTY, M. SHAHBAKHTI, G. VOSSOUGHI
Int J Automot Technol. 2015;16(1):127-138. DOI: https://doi.org/10.1007/s12239-015-0014-5
|
|
Cited By 6 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
139 |
EFFECT OF A PISTON HOLE UNDER THE SLIP CONTROL CONDITION OF THE LOCK-UP CLUTCH IN A TORQUE CONVERTER
J. D. JANG, I. T. LEE, W. J. KIM, D. M. CHUN
Int J Automot Technol. 2015;16(1):139-144. DOI: https://doi.org/10.1007/s12239-015-0015-4
|
|
Cited By 6 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
145 |
DETERMINATION OF DYNAMIC STRAIN HARDENING PARAMETERS USING THE VIRTUAL FIELDS METHOD
J. H. KIM, G. A. LEE, M. G. LEE
Int J Automot Technol. 2015;16(1):145-151. DOI: https://doi.org/10.1007/s12239-015-0016-3
|
|
Cited By 11 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
153 |
HUMAN RIDE COMFORT PREDICTION OF DRIVE TRAIN USING MODELING METHOD BASED ON ARTIFICIAL NEURAL NETWORKS
S. LERSPALUNGSANTI, A. ALBERS, S. OTT, T. DÜSER
Int J Automot Technol. 2015;16(1):153-166. DOI: https://doi.org/10.1007/s12239-015-0017-2
|
|
Cited By 13 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
167 |
FINITE ELEMENT SIMULATION OF MECHANICAL BUMP SHOCK ABSORBER FOR SLED TESTS
M. JIMENEZ, J. MARTINEZ, U. FIGUEROA, A. GUEVARA
Int J Automot Technol. 2015;16(1):167-172. DOI: https://doi.org/10.1007/s12239-015-0018-1
|
|
Cited By 5 |
|
|
|
|
> Previous issue
