|
|
|
Engine, Emission Technology |
|
699 |
EFFECT OF FUEL METERING ON COMBUSTION AND EMISSIONS OF A PFI GASOLINE ENGINE DURING FAST STARTUP UNDER AN HEV-LIKE MODE
S. YU, L. LI
Int J Automot Technol. 2014;15(5):699-708. DOI: https://doi.org/10.1007/s12239-014-014-0072-0
|
|
|
|
|
Engine, Emission Technology |
|
709 |
ANALYSIS OF THE EFFECT OF COLD START ON FUEL ECONOMY OF GASOLINE AUTOMATIC TRANSMISSION VEHICLE
Y. K. LEE, J. I. PARK, J. H. LEE
Int J Automot Technol. 2014;15(5):709-714. DOI: https://doi.org/10.1007/s12239-014-0073-z
 
|
Cited By 5 |
|
|
|
|
|
Engine, Emission Technology |
|
715 |
CHARACTERISTICS OF FLAME KERNAL RADIUS IN A SPARK IGNITION ENGINE ACCORDING TO THE ELECTRIC SPARK IGNITION ENERGY
Y. H. CHANG, S. B. HAN
Int J Automot Technol. 2014;15(5):715-722. DOI: https://doi.org/10.1007/s12239-014-0074-y
|
|
Cited By 4 |
|
|
|
|
|
Engine, Emission Technology |
|
723 |
UREA-SCR SYSTEM OPTIMIZATION WITH VARIOUS COMBINATIONS OF MIXER TYPES AND DECOMPOSITION PIPE LENGTHS
Y. S. CHO, S. W. LEE, W. C. CHOI, Y. B. YOON
Int J Automot Technol. 2014;15(5):723-731. DOI: https://doi.org/10.1007/s12239-014-0075-x
|
|
Cited By 31 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
733 |
COMPUTATION OF SURFACE TEMPERATURES AND ENERGY DISSIPATION IN DRY FRICTION CLUTCHES FOR VARYING TORQUE WITH TIME
O. I. ABDULLAHA, O. I. ABDULLAHA
Int J Automot Technol. 2014;15(5):733-740. DOI: https://doi.org/10.1007/s12239-014-0076-9
|
|
Cited By 27 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
741 |
HIGH SPEED DRIVING STABILITY OF PASSENGER CAR UNDER CROSSWIND EFFECTS
J. D. KEE, J. H. RHO, K. H. KIM, D. H. LEE
Int J Automot Technol. 2014;15(5):741-747. DOI: https://doi.org/10.1007/s12239-014-0077-8
|
|
Cited By 27 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
749 |
DEVIATED STATE DETECTION METHOD IN DRIVING AROUND CURVES BASED ON NATURALISTIC DRIVING BEHAVIOR DATABASE FOR DRIVER ASSISTANCE SYSTEMS
M. SHINO, H. YOSHITAKE, M. HIRAMATSU, T. SUNDA, M. KAMA
Int J Automot Technol. 2014;15(5):749-755. DOI: https://doi.org/10.1007/s12239-014-0078-7
|
|
Cited By 4 |
|
|
|
|
|
Automobile Body and Safety |
|
757 |
ROBUST DESIGN OPTIMIZATION OF FRONTAL STRUCTURES FOR MINIMIZING INJURY RISKS OF FLEX PEDESTRIAN LEGFORM IMPACTOR
Y. H. LEE, Y. J. JOO, J. S. PARK, Y. S. KIM, H. J. YIM
Int J Automot Technol. 2014;15(5):757-764. DOI: https://doi.org/10.1007/s12239-014-0079-6
|
|
Cited By 13 |
|
|
|
|
|
Automobile Body and Safety |
|
765 |
FATIGUE STRENGTH ASSESSMENT INCLUDING WELDING RESIDUAL STRESS OF SPOT WELDED JOINTS SUBJECTED TO CROSS-TENSION LOADS
Y. S. PARK, I. S. SOHN, D. H. BAE
Int J Automot Technol. 2014;15(5):765-771. DOI: https://doi.org/10.1007/s12239-014-0080-0
|
|
Cited By 5 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
773 |
NOVEL EVALUATION METHOD OF FUEL CONSUMPTION AND EMISSION FOR HEAVY-DUTY HYBRID ELECTRIC VEHICLES
F. W. YAN, P. ZHANG, C. Q. DU, D. GUO
Int J Automot Technol. 2014;15(5):773-779. DOI: https://doi.org/10.1007/s12239-014-0081-z
|
|
Cited By 3 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
781 |
ETS FUZZY DRIVER MODEL FOR SIMULTANEOUS LONGITUDINAL AND LATERAL VEHICLE CONTROL
S. AKCA, S. ERTUGRUL
Int J Automot Technol. 2014;15(5):781-794. DOI: https://doi.org/10.1007/s12239-014-0082-y
|
|
Cited By 9 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
795 |
TRANSIENT MODELING AND VALIDATION OF LITHIUM ION BATTERY PACK WITH AIR COOLED THERMAL MANAGEMENT SYSTEM FOR ELECTRIC VEHICLES
G. Y. CHO, J. W. CHOI, J. H. PARK, S. W. CHA
Int J Automot Technol. 2014;15(5):795-803. DOI: https://doi.org/10.1007/s12239-014-0083-x
|
|
Cited By 48 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
805 |
DEVELOPMENT OF AN AUXILIARY MODE POWERTRAIN FOR HYBRID ELECTRIC SCOOTER
C. Y. TSENG, C. H. YU, Y. T. LIN
Int J Automot Technol. 2014;15(5):805-814. DOI: https://doi.org/10.1007/s12239-014-0084-9
|
|
Cited By 1 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
815 |
VEHICLE VELOCITY ESTIMATION USING EFFECTIVE INERTIA FOR AN IN-WHEEL ELECTRIC VEHICLE
S. Y. KO, J. W. KO, S. M. LEE, J. S. CHEON, H. S. KIM
Int J Automot Technol. 2014;15(5):815-821. DOI: https://doi.org/10.1007/s12239-014-0085-8
|
|
Cited By 7 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
823 |
MODEL FOR DYNAMIC BEHAVIOR OF THE CRANKSHAFT OF AN AIR COOLED DIESEL ENGINE SUBJECTED TO SEVERE FUNCTIONING
O. KEITA, T. HEDHLI, J. BESSROUR
Int J Automot Technol. 2014;15(5):823-833. DOI: https://doi.org/10.1007/s12239-014-0086-7
|
|
Cited By 6 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
835 |
DEVELOPMENT OF THE PERFORMANCE SIMULATOR FOR ELECTRIC SCOOTERS WITH AN IN-WHEEL MOTOR
B. WANG, J. H. CHOI, H. W. SONG, H. K. CHOI, S. H. HWANG
Int J Automot Technol. 2014;15(5):835-841. DOI: https://doi.org/10.1007/s12239-014-0087-6
|
|
Cited By 3 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
843 |
FATIGUE ASSESSMENT OF REAR AXLE UNDER SERVICE LOADING HISTORIES CONSIDERING THE STRENGTHENING AND DAMAGING EFFECTS OF LOADS BELOW FATIGUE LIMIT
L. H. ZHAO, S. L. ZHENG, J. Z. FENG, H. F. ZHOU, Y. F. XING
Int J Automot Technol. 2014;15(5):843-852. DOI: https://doi.org/10.1007/s12239-014-0088-5
|
|
Cited By 14 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
853 |
RESEARCH ON THE SOUND METRIC OF DOOR-SLAMMING SOUND BASED ON LEAKY INTEGRATION AND WAVELET DECOMPOSITION
C. YANG, D. YU, B. XIA
Int J Automot Technol. 2014;15(5):853-860. DOI: https://doi.org/10.1007/s12239-014-0089-4
|
|
Cited By 6 |
|
|
|
|
> Previous issue
