|
Automobile Chassis & Vehicle Dynamic |
|
|
DESIGN OF A COMPACT 18-SPEED EPICYCLIC TRANSMISSION FOR A PERSONAL MOBILITY VEHICLE
J. KIM
Int J Automot Technol. 2016;17(6):977-982. DOI: https://doi.org/10.1007/s12239-016-0095-9
 
|
Cited By 8 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
IMPLEMENTATION OF DISCHARGING/CHARGING CURRENT SENSORLESS STATE-OF-CHARGE ESTIMATOR REFLECTING CELL-TO-CELL VARIATIONS IN LITHIUM-ION SERIES BATTERY PACKS
C. Y. CHUN, B. H. CHO, J. KIM
Int J Automot Technol. 2016;17(5):909-916. DOI: https://doi.org/10.1007/s12239-016-0088-8
|
|
Cited By 8 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
OPTIMAL POWER DISTRIBUTION OF FRONT AND REAR MOTORS FOR MINIMIZING ENERGY CONSUMPTION OF 4-WHEEL-DRIVE ELECTRIC VEHICLES
J. KIM
Int J Automot Technol. 2016;17(2):319-326. DOI: https://doi.org/10.1007/s12239-016-0032-y
|
|
Cited By 25 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
OPERATIONAL EFFICIENCY COMPARISON ON ECO-FRIENDLY VEHICLES INCLUDING DYNAMIC WIRELESS CHARGING
K. YI, J. KIM, K. HWANG, M. LEE, K. KIM, H. KIM, I. S. SUH
Int J Automot Technol. 2015;16(6):1017-1030. DOI: https://doi.org/10.1007/s12239-015-0104-4
|
|
Cited By 5 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
PERFORMANCE EVALUATION OF INTEGRATED CONTROL OF DIRECT YAW MOMENT AND SLIP RATIO CONTROL FOR ELECTRIC VEHICLE WITH REAR IN-WHEEL MOTORS ON SPLIT-MU ROAD
C. J. KIM, A. A. MIAN, S. H. KIM, S. H. BACK, H. B. JANG, J. H. JANG, C. S. HAN
Int J Automot Technol. 2015;16(6):939-946. DOI: https://doi.org/10.1007/s12239-015-0096-0
|
|
Cited By 16 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
DEVELOPMENT OF A TIRE MODEL BASED ON AN ANALYSIS OF TIRE STRAIN OBTAINED BY AN INTELLIGENT TIRE SYSTEM
S. J. KIM, K.-S. KIM, Y.-S. YOON
Int J Automot Technol. 2015;16(5):865-875. DOI: https://doi.org/10.1007/s12239-015-0088-0
|
|
Cited By 32 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
REAL-TIME PATH PLANNING OF AUTONOMOUS VEHICLES FOR UNSTRUCTURED ROAD NAVIGATION
K. CHU, J. KIM, K. JO, M. SUNWOO
Int J Automot Technol. 2015;16(4):653-668. DOI: https://doi.org/10.1007/s12239-015-0067-5
|
|
Cited By 45 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
FUEL ECONOMY ASSESSMENT OF NOVEL MULTI-MODE PARALLEL HYBRID ELECTRIC VEHICLE
S. J. KIM, Y.-S. YOON, S. KIM, K.-S. KIM
Int J Automot Technol. 2015;16(3):501-512. DOI: https://doi.org/10.1007/s12239-015-0052-z
|
|
Cited By 10 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
SIMULATION STUDY ON REFRIGERATION PERFORMANCE UNDER FROST CONDITION IN A R404A REFRIGERATOR TRUCK TYPE
S. H. KIM, T. J. KIM, Y. C. SHIN, H. H. CHO
Int J Automot Technol. 2015;16(3):387-397. DOI: https://doi.org/10.1007/s12239-015-0040-3
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
PREDICTION AND MINIMIZATION OF MICRO DEFORMATION ON THE AUTOMOBILE HOOD AFTER DIPPING PROCESS
J. KIM, S. PARK, N. KIM, N. HUR, C. OH
Int J Automot Technol. 2015;16(2):293-300. DOI: https://doi.org/10.1007/s12239-015-0031-4
|
|
Cited By 3 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
EFFECT OF A PISTON HOLE UNDER THE SLIP CONTROL CONDITION OF THE LOCK-UP CLUTCH IN A TORQUE CONVERTER
J. D. JANG, I. T. LEE, W. J. KIM, D. M. CHUN
Int J Automot Technol. 2015;16(1):139-144. DOI: https://doi.org/10.1007/s12239-015-0015-4
|
|
Cited By 6 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
MOTOR CONTROL ALGORITHM FOR AN OPTIMAL ENGINE OPERATION OF POWER SPLIT HYBRID ELECTRIC VEHICLE
S. HONG, H. KIM, J. KIM
Int J Automot Technol. 2015;16(1):97-105. DOI: https://doi.org/10.1007/s12239-015-0011-8
|
|
Cited By 15 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
LIGHT-WEIGHT DESIGN OF AUTOMOTIVE SUSPENSION LINK BASED ON DESIGN OF EXPERIMENT
J. H. PARK, K. J. KIM, J. W. LEE, J. K. YOON
Int J Automot Technol. 2015;16(1):67-71. DOI: https://doi.org/10.1007/s12239-015-0007-4
|
|
Cited By 36 |
|
|
|
|
|
Engine, Emission Technology |
|
|
DESIGN OF AN AIR-COOLED CONDENSER FOR ENGINE COOLANT WASTE HEAT RECOVERY
S. J. BAE, H. S. HEO, C. J. KIM, H. Y. LEE
Int J Automot Technol. 2015;16(1):17-26. DOI: https://doi.org/10.1007/s12239-015-0002-9
|
|
Cited By 3 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
MODEL PREDICTIVE CONTROL STRATEGY FOR SMOOTH PATH TRACKING OF AUTONOMOUS VEHICLES WITH STEERING ACTUATOR DYNAMICS
E. KIM, J. KIM, M. SUNWOO
Int J Automot Technol. 2014;15(7):1155-1164. DOI: https://doi.org/10.1007/s12239-014-0120-9
|
|
Cited By 106 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
IMC AND CREEP BEHAVIOR IN LEAD-FREE SOLDER JOINTS OF Sn-Ag AND Sn-Ag-Cu ALLOY SYSTEM BY SP METHOD
Z. J. YANG, S. M. YANG, H. S. YU, S. J. KANG, J. H. SONG, K. J. KIM
Int J Automot Technol. 2014;15(7):1137-1142. DOI: https://doi.org/10.1007/s12239-014-0118-3
|
|
Cited By 12 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
DEVELOPMENT OF ACTIVE FRONT WHEEL STEERING CONTROL SYSTEM KEEPING STABLE REGION IN DRIVING PHASE DIAGRAM
J. KIM, Y. KIM
Int J Automot Technol. 2014;15(7):1107-1117. DOI: https://doi.org/10.1007/s12239-014-0115-6
|
|
Cited By 8 |
|
|
|
|
|
Engine, Emission Technology |
|
|
INVESTIGATION ON THE FLAME CHARACTERISTICS IN A PCCI ENGINE USING ENDOSCOPE SYSTEM WITH MICRO-CASSEGRAIN
H. I. KIM, Y. J. KIM, K. H. LEE, H. Y. JEONG, Y. IKEDA
Int J Automot Technol. 2014;15(7):1063-1070. DOI: https://doi.org/10.1007/s12239-014-0110-y
|
|
Cited By 6 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
MICRO DEFORMATION OF AUTOMOBILE HOOD IN DIPPING PROCESS USING STIFFNESS
J. KIM, Naksoo Kim, Nahmkeon Hur, CHANG-SEOK OH
Int J Automot Technol. 2014;15(3):475-482. DOI: https://doi.org/10.1007/s12239-014-0050-6
|
|
Cited By 4 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
FATIGUE LIFE PREDICTION OF A RUBBER MATERIAL BASED ON DYNAMIC CRACK GROWTH CONSIDERING SHEAR EFFECT
H. J. KIM, M. W. SONG, H. I. MOON, H. KIM, H. Y. KIM
Int J Automot Technol. 2014;15(2):317-324. DOI: https://doi.org/10.1007/s12239-014-0032-8
|
|
Cited By 8 |
|
|
|
|
|
Engine, Emission Technology |
|
|
EXPERIMENTAL INVESTIGATION OF B20 COMBUSTION AND EMISSIONS UNDER VARIOUS INTAKE CONDITIONS FOR LOW-TEMPERATURE COMBUSTION
J. KIM, J. JANG, K. LEE, Y. LEE, S. LEE, S. OH
Int J Automot Technol. 2014;15(2):183-189. DOI: https://doi.org/10.1007/s12239-014-0020-z
|
|
Cited By 8 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
DESIGN OF A SIGNAL TRANSDUCER FOR DIRECT CONVERSION OF WHEEL LINEAR ACCELERATIONS INTO TIRE LATERAL FORCES
H. J. YOON, J. KIM
Int J Automot Technol. 2013;14(6):897-902. DOI: https://doi.org/10.1007/s12239-013-0098-8
|
|
Cited By 1 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
CONCEPTUAL DESIGN OF ECONOMIC HYBRID VEHICLE SYSTEM USING CLUTCHLESS GEARED SMART TRANSMISSION
Y.-S. YOON, S. J. KIM, K.-S. KIM
Int J Automot Technol. 2013;14(5):779-784. DOI: https://doi.org/10.1007/s12239-013-0086-z
|
|
Cited By 25 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
COLLECTION PERFORMANCE OF AN ELECTROSTATIC FILTRATION SYSTEM COMBINED WITH A METALLIC FLOW-THROUGH FILTER FOR ULTRAFINE DIESEL PARTICULATE MATTERS
H. J. KIM, B. HAN, G. B. CHO, Y. J. KIM, J. S. YOO, T. ODA
Int J Automot Technol. 2013;14(3):489-497. DOI: https://doi.org/10.1007/s12239-013-0053-8
|
|
Cited By 7 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
LATERAL CONTROLLER DESIGN FOR AN UNMANNED VEHICLE VIA KALMAN FILTERING
M. H. LEE, K. S. LEE, H. G. PARK, Y. C. CHA, D. J. KIM, B. KIM, S. HONG, H. H. CHUN
Int J Automot Technol. 2012;13(5):801-807. DOI: https://doi.org/10.1007/s12239-012-0080-x
|
|
Cited By 11 |
|
|
|
|
|
Automobile Body and Safety |
|
|
SENSITIVITY ANALYSIS FOR REDUCING CRITICAL RESPONSES AT THE AXLE SHAFT OF A LIGHTWEIGHT VEHICLE
C.-J. KIM, Y. J. KANG, B.-H. LEE, H.-J. AHN
Int J Automot Technol. 2012;13(3):451-458. DOI: https://doi.org/10.1007/s12239-012-0042-3
|
|
Cited By 12 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
DEVELOPMENT OF AN ELECTRIC ACTIVE ROLLCONTROL (ARC) ALGORITHM FOR A SUV
K. JEON, H. HWANG, S. CHOI, J. KIM, K. JANG, K. YI
Int J Automot Technol. 2012;13(2):247-253. DOI: https://doi.org/10.1007/s12239-012-0021-8
|
|
Cited By 32 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
RELATIONSHIP BETWEEN OCCUPANT INJURY AND THE PERTURBATION MARK ON THE VELOCITY INDICATOR ON A CLUSTER PANEL
S.-J. KIM, W.-J. JEON, J.-J. PARK, B.-S. MOON, Y.-J. CHO, Y.-L. SEO, N.-K. PARK, K. SON
Int J Automot Technol. 2011;12(6):951-958. DOI: https://doi.org/10.1007/s12239-011-0108-7
|
|
Cited By 2 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
OBJECTIFICATION OF ON-CENTER HANDLING CHARACTERISTICS BASED ON SPRING-MASS-DAMPER SYSTEM
J. KIM
Int J Automot Technol. 2011;12(6):857-864. DOI: https://doi.org/10.1007/s12239-011-0098-5
|
|
Cited By 9 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
OPTIMAL DESIGN OF THE EXHAUST SYSTEM LAYOUT TO SUPPRESS THE DISCHARGE NOISE FROM AN IDLING ENGINE
Jeong-Guon Ih, C.-Y. CHOI, T.-K. KIM, S.-H. JANG, H.-J. KIM
Int J Automot Technol. 2011;12(4):617-630. DOI: https://doi.org/10.1007/s12239-011-0072-2
|
|
Cited By 6 |
|
|
|
|
> Browse Articles > Search
