|
Fuel injector, Control valve, Cavitation, Numerical simulati |
|
|
NUMERICAL STUDY ON CAVITATION FLOW CHARACTERISTICS IN DIESEL FUEL INJECTOR CONTROL VALVE
Jingbin Liu , Zhenming Liu , Jiechang Wu , Xiaolei Gu
Int J Automot Technol. 2022;23(4):881-897. DOI: https://doi.org/10.1007/s12239-022-0078-y
 
|
Cited By 2 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering |
|
|
STUDY ON CAVITATING FLOW INSIDE ORIFICE AND SPRAY ANGLE NEAR NOZZLE TIP ACCORDING TO THE POSITION OF NEEDLE USING ENLARGED TRANSPARENT ACRYLIC NOZZLE
Byunggyun Kim, Seungcheon Ro, Suhan Park, Young-Bae Kim, Byungchul Choi, Seunghun Jung, Dong-Weon Lee
Int J Automot Technol. 2021;22(1):11-18. DOI: https://doi.org/10.1007/s12239-021-0002-x
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
STUDY ON TRANSIENT FUEL HYDRODYNAMIC FORCE CHARACTERISTICS OF HIGH-SPEED SOLENOID VALVE FOR COMMON RAIL INJECTOR
Jianhui Zhao, Shunan Zhao, Leonid Grekho
Int J Automot Technol. 2020;21(5):1257-1269. DOI: https://doi.org/10.1007/s12239-020-0119-3
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
INTERNAL CAVITATING FLOW AND EXTERNAL SPRAY BEHAVIOR CHARACTERISTICS ACCORDING TO LENGTH-TO-WIDTH RATIO OF TRANSPARENT NOZZLE ORIFICE
Seungcheon Ro, Byunggyun Kim, Suhan Park, Young-Bae Kim, Byungchul Choi, Seunghun Jung, Dong-Weon Lee
Int J Automot Technol. 2020;21(1):181-188. DOI: https://doi.org/10.1007/s12239-020-0018-7
|
|
Cited By 3 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
INVESTIGATION OF CAVITATION PROCESS IN MONOTUBE SHOCK ABSORBER
Viktor Skrickij, Dzmitry Savitski, Valentin Ivanov, Paulius Skačkauskas
Int J Automot Technol. 2018;19(5):801-810. DOI: https://doi.org/10.1007/s12239-018-0077-1
|
|
Cited By 10 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
DESIGN AND OPTIMIZATION OF AN LPG ROLLER VANE PUMP FOR SUPPRESSING CAVITATION
D. DANARDONO, K. S. Kim, E. ROZIBOYEV, C. U. Kim
Int J Automot Technol. 2010;11(3):323-330. DOI: https://doi.org/10.1007/s12239-010-0040-2
|
|
Cited By 9 |
|
|
|
|
|
|
|
|
EROSION-CORROSION DAMAGES OF WATER-PUMP IMPELLER
D.-I. LEE, H.-C. LIM
Int J Automot Technol. 2009;10(5):629-634.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
MULTIAXIAL STRESS CREEP RUPTURE MECHANISMS OF AZ31 MAGNESIUM ALLOY
S. H. KIM, H. K. KIM
Int J Automot Technol. 2009;10(3):365-372.
|
|
|
|
|
Alternative Energy & Vehicle |
|
|
EXPERIMENTAL INVESTIGATION OF NOZZLE CAVITATING FLOW CHARACTERISTICS FOR DIESEL AND BIODIESEL FUELS
H. K. SUH, S. H. PARK, C. S. LEE
Int J Automot Technol. 2008;9(2):217-224.
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
ADJOINT METHOD FOR CONTROLLED CAVITATION INVERSE NOZZLE DESIGN
S. PETROPOULOU, M. GAVAISES, A. THEODORAKAKOS
Int J Automot Technol. 2006;7(3):283-288.
|
|
|
|
> Browse Articles > Search
